Title: Exhaust...... Poll
Post by: Cusimano on March 08, 2005, 11:46:12 AM
Post by: Cusimano on March 08, 2005, 11:46:12 AM
Whats on your exhaust....
I just wanna see what everyone has for an exhaust (not looking for pros or cons)
I just wanna see what everyone has for an exhaust (not looking for pros or cons)
Title: Exhaust...... Poll
Post by: cernunos on March 08, 2005, 11:47:11 AM
Post by: cernunos on March 08, 2005, 11:47:11 AM
Stock. Love it...this forum too.
C.......
C.......
Title: Exhaust...... Poll
Post by: dgyver on March 08, 2005, 11:51:36 AM
Post by: dgyver on March 08, 2005, 11:51:36 AM
Full Yosh....what else is there?
Title: Exhaust...... Poll
Post by: Rashad on March 08, 2005, 12:04:56 PM
Post by: Rashad on March 08, 2005, 12:04:56 PM
FULL V&H... came with the bike, and i love how it rusts after you paint it.. looks custom. :x
Title: Exhaust...... Poll
Post by: weaselnoze on March 08, 2005, 12:06:52 PM
Post by: weaselnoze on March 08, 2005, 12:06:52 PM
Wileyco slipon
Title: Exhaust...... Poll
Post by: tdan553527 on March 08, 2005, 12:07:37 PM
Post by: tdan553527 on March 08, 2005, 12:07:37 PM
Wileyco, just installed this weekend, but love it so far. whup, whup, whup
Title: Exhaust...... Poll
Post by: scratch on March 08, 2005, 12:18:16 PM
Post by: scratch on March 08, 2005, 12:18:16 PM
Stock with a 70mph gravity/stupidity ground down flat side that's rusting.
Title: Exhaust...... Poll
Post by: sprint_9 on March 08, 2005, 12:21:36 PM
Post by: sprint_9 on March 08, 2005, 12:21:36 PM
V&H
Title: Exhaust...... Poll
Post by: Focer on March 08, 2005, 12:37:10 PM
Post by: Focer on March 08, 2005, 12:37:10 PM
WileyCo sitting in my living roon.. just waiting for a flange...cough cough
Title: Exhaust...... Poll
Post by: se7enty7 on March 08, 2005, 12:39:30 PM
Post by: se7enty7 on March 08, 2005, 12:39:30 PM
Quote from: weaselnozeWileyco slipon
Title: Exhaust...... Poll
Post by: goat on March 08, 2005, 12:54:07 PM
Post by: goat on March 08, 2005, 12:54:07 PM
yoshi slip-on
I really don't have anything to compare it to, but I don't have any complaints either.
I really don't have anything to compare it to, but I don't have any complaints either.
Title: Exhaust...... Poll
Post by: Eklipse on March 08, 2005, 01:09:06 PM
Post by: Eklipse on March 08, 2005, 01:09:06 PM
Got my wileyco in the closet. This week! I hope :)
Title: Exhaust...... Poll
Post by: Jake D on March 08, 2005, 01:12:39 PM
Post by: Jake D on March 08, 2005, 01:12:39 PM
Wileyco, wrapped in a towel in my garage (and since my bike is getting torn apart as we speak, it will likely stay there for a while).
I've also got a really cool stock pipe that is full of oil. . .
I've also got a really cool stock pipe that is full of oil. . .
Title: Yea
Post by: The Buddha on March 08, 2005, 01:53:12 PM
Post by: The Buddha on March 08, 2005, 01:53:12 PM
Yea yea ... I am boxing them as we speak ... They are going to the post office in 3 or so hours, I went there earlier to get boxes ... and there was 300 people in line ... luch break time and everyone is at post office ... like christmas time ...
Now I might send a restricled one to those that have no preference ... or may send un restricted ... either way ... removeable so Y'all have fun ...
Cool.
Srinath.
Now I might send a restricled one to those that have no preference ... or may send un restricted ... either way ... removeable so Y'all have fun ...
Cool.
Srinath.
Title: Exhaust...... Poll
Post by: Michael on March 08, 2005, 01:54:09 PM
Post by: Michael on March 08, 2005, 01:54:09 PM
Magnum full system from http://www.formula1mc.com.au.
See here http://au.pg.photos.yahoo.com/ph/mixalns/album?.dir=caee&.src=ph&store=&prodid=&.done=http%3a//au.photos.yahoo.com/ph//my_photos for photos.
See here http://au.pg.photos.yahoo.com/ph/mixalns/album?.dir=caee&.src=ph&store=&prodid=&.done=http%3a//au.photos.yahoo.com/ph//my_photos for photos.
Title: Exhaust...... Poll
Post by: Dom on March 08, 2005, 01:55:24 PM
Post by: Dom on March 08, 2005, 01:55:24 PM
What I liked to do with my wileyco was scream into it at the top of my lungs while I walked around the office. It's so cool how it totally muffles the sound.
Title: Exhaust...... Poll
Post by: Jake D on March 08, 2005, 01:55:28 PM
Post by: Jake D on March 08, 2005, 01:55:28 PM
I'm a restricted one! I'm spending all my money on new rings. No ducats left for a re-jet.
Anybody want a stock muffler? It is already full of oil?
Anybody want a stock muffler? It is already full of oil?
Title: Jake D
Post by: The Buddha on March 08, 2005, 02:20:20 PM
Post by: The Buddha on March 08, 2005, 02:20:20 PM
OK JakeD I'll note that ... Was just copying addresses off my paypal ...
BTW I hope no one likes their rear turnsignals too much ... cos you might burn them ... these exit high high high ... I fitted these on the 89 ... whihc has tiny LED ones tied high up in the rear fender ... so I have no clue where stock T/S'es are ...
If the fit is a shade loose (and yes I had 2 different dia pipes ... so some are loose and some are not ... ) use muffer tape to cover and seal it up ... and the loose fit actually has a small advantage ... You can cut you headers leaving a longer length of pipe on it exposed and shove it deeper in the mid pipe ,,, You'll know ... dont worry ... they all fit, all are SS and just minor difference ... Next lot is all smaller dia pipe ... and no you may not chose what you want ... too complicated to do that ...
BTW who wants flanges ... might have to be steel round, SS pipe and $40 as always ... I dunno but order up ... cos I'll only be too happy to drop this ... once the wiley co is gone the flanges are worthless ... so I dont want to make/buy etc any more than y'all need ...
Cool.
Srinath.
BTW I hope no one likes their rear turnsignals too much ... cos you might burn them ... these exit high high high ... I fitted these on the 89 ... whihc has tiny LED ones tied high up in the rear fender ... so I have no clue where stock T/S'es are ...
If the fit is a shade loose (and yes I had 2 different dia pipes ... so some are loose and some are not ... ) use muffer tape to cover and seal it up ... and the loose fit actually has a small advantage ... You can cut you headers leaving a longer length of pipe on it exposed and shove it deeper in the mid pipe ,,, You'll know ... dont worry ... they all fit, all are SS and just minor difference ... Next lot is all smaller dia pipe ... and no you may not chose what you want ... too complicated to do that ...
BTW who wants flanges ... might have to be steel round, SS pipe and $40 as always ... I dunno but order up ... cos I'll only be too happy to drop this ... once the wiley co is gone the flanges are worthless ... so I dont want to make/buy etc any more than y'all need ...
Cool.
Srinath.
Title: Exhaust...... Poll
Post by: Jake D on March 08, 2005, 02:26:55 PM
Post by: Jake D on March 08, 2005, 02:26:55 PM
I've got flush mount turn signals.
No worries.
Stoked.
(another high-jacked thread)
Pour out a little liquor.
No worries.
Stoked.
(another high-jacked thread)
Pour out a little liquor.
Title: Exhaust...... Poll
Post by: denman on March 08, 2005, 03:10:06 PM
Post by: denman on March 08, 2005, 03:10:06 PM
after tonight it will be a v&h super sport system.
Title: Exhaust...... Poll
Post by: manofthefield on March 08, 2005, 03:13:20 PM
Post by: manofthefield on March 08, 2005, 03:13:20 PM
Recently repainted stock :thumb:
Title: Exhaust...... Poll
Post by: splatt on March 08, 2005, 03:44:47 PM
Post by: splatt on March 08, 2005, 03:44:47 PM
what type of paint did you use to repaint your exhaust? also, did you sandblast it? and getting back on topic, soon to be wileyco exhaust (no restrictor please srinath...matt), but currently rusty stock. :nono:
Title: Exhaust...... Poll
Post by: Blueknyt on March 08, 2005, 04:05:11 PM
Post by: Blueknyt on March 08, 2005, 04:05:11 PM
full system hindle
Title: Exhaust...... Poll
Post by: John Bates on March 08, 2005, 04:12:20 PM
Post by: John Bates on March 08, 2005, 04:12:20 PM
Stock.
(http://i91.photobucket.com/albums/k304/miphotoz_2006/exhaust001.jpg)
Just refurbished to look like this:
(http://i91.photobucket.com/albums/k304/miphotoz_2006/exhaust007.jpg)
(http://i91.photobucket.com/albums/k304/miphotoz_2006/exhaust001.jpg)
Just refurbished to look like this:
(http://i91.photobucket.com/albums/k304/miphotoz_2006/exhaust007.jpg)
Title: Exhaust...... Poll
Post by: resistor on March 08, 2005, 04:20:08 PM
Post by: resistor on March 08, 2005, 04:20:08 PM
Cobra F1s slip-on
Title: Exhaust...... Poll
Post by: alexXx on March 08, 2005, 04:23:11 PM
Post by: alexXx on March 08, 2005, 04:23:11 PM
cobra f1r slip-on
- alex
- alex
Title: Exhaust...... Poll
Post by: pizzleboy on March 08, 2005, 04:31:10 PM
Post by: pizzleboy on March 08, 2005, 04:31:10 PM
Cobra F1R slip on
boy, deja-vu
boy, deja-vu
Title: Exhaust...... Poll
Post by: treybrad on March 08, 2005, 04:55:40 PM
Post by: treybrad on March 08, 2005, 04:55:40 PM
F1s slip-on...
http://webspace.utexas.edu/treybrad/www/gstwin/cobra_f1s.avi
trey
*edit* oh yeah, that file is huge... like 16MB. and the smoking is from my exhaust wrap 'breaking in'... it isn't going to explode...
http://webspace.utexas.edu/treybrad/www/gstwin/cobra_f1s.avi
trey
*edit* oh yeah, that file is huge... like 16MB. and the smoking is from my exhaust wrap 'breaking in'... it isn't going to explode...
Title: Exhaust...... Poll
Post by: manofthefield on March 08, 2005, 04:58:52 PM
Post by: manofthefield on March 08, 2005, 04:58:52 PM
Quote from: splattwhat type of paint did you use to repaint your exhaust? also, did you sandblast it?I used some 1200(?) degree spray paint that my dad had sitting around in the basement. I didn't sandblast it, but I did take a wire wheel to all the rusty spots. I'm not sure how well it will hold up. If it holds up well great, if not I may take it somewhere to be sandblasted next time. Also, check out John's DIY exauhst painting info at the bottom of the page.
Title: Exhaust...... Poll
Post by: gsJack on March 08, 2005, 05:00:27 PM
Post by: gsJack on March 08, 2005, 05:00:27 PM
STOCK
Title: Exhaust...... Poll
Post by: mondo27 on March 08, 2005, 05:51:13 PM
Post by: mondo27 on March 08, 2005, 05:51:13 PM
stock for now....have a wileyco sitting in the garage waiting for a flange + midpipe :(
Title: Exhaust...... Poll
Post by: stevemac12073 on March 08, 2005, 06:51:31 PM
Post by: stevemac12073 on March 08, 2005, 06:51:31 PM
wow a lot of us with wileco slip ons waiting for flanges :lol:
Title: exhuast
Post by: gs500freak on March 08, 2005, 08:20:31 PM
Post by: gs500freak on March 08, 2005, 08:20:31 PM
i got a stock exhaust on it, and a gxsr 1000 mid pipe and can in my garage waiting till i find someone to fit it on to my 04 500f.
Title: Exhaust...... Poll
Post by: cummuterguy on March 08, 2005, 08:23:24 PM
Post by: cummuterguy on March 08, 2005, 08:23:24 PM
I've got a yoshi full system for now
Title: Exhaust...... Poll
Post by: GRU on March 08, 2005, 09:05:26 PM
Post by: GRU on March 08, 2005, 09:05:26 PM
gsxr canister
Title: Ha ha
Post by: The Buddha on March 08, 2005, 09:14:20 PM
Post by: The Buddha on March 08, 2005, 09:14:20 PM
Quote from: stevemac12073wow a lot of us with wileco slip ons waiting for flanges :lol:
Ha ha ... very subtle ... Its comming ... BTW stevemac ... you are waiting for clip on's too ... the powder coaters had loss of power (Yea in my third world state of NC every time there is any wind ... we lose power ) so today became tommorow ... rest of flanges were dropped off at USPS an hour ago, some more are going tommorow morning ... right after the people I PM'ed respond ... and the clip on's and others will go tommorow night ...
Cool.
Srinath.
Title: Exhaust...... Poll
Post by: MXF7290 on March 08, 2005, 09:33:48 PM
Post by: MXF7290 on March 08, 2005, 09:33:48 PM
stock, but the can was opened and "cleaned out" :mrgreen:
Title: Exhaust...... Poll
Post by: stevemac12073 on March 08, 2005, 09:40:32 PM
Post by: stevemac12073 on March 08, 2005, 09:40:32 PM
no problem srinath, just figured id jump on the bandwagon and mess with you. now ship them already :lol:
Title: Exhaust...... Poll
Post by: average on March 08, 2005, 09:48:06 PM
Post by: average on March 08, 2005, 09:48:06 PM
Quote from: FocerWileyCo sitting in my living roon.. just waiting for a flange...cough coughditto :P
Title: Exhaust...... Poll
Post by: weaselnoze on March 08, 2005, 09:50:39 PM
Post by: weaselnoze on March 08, 2005, 09:50:39 PM
we should have a thread where everyone posts a picture of their wileyco. lol there are so many..
Title: Exhaust...... Poll
Post by: Jeppy on March 09, 2005, 12:09:46 AM
Post by: Jeppy on March 09, 2005, 12:09:46 AM
Cobra F1s Slip-On Baby!!!!!!!!!
Title: Exhaust...... Poll
Post by: conflicttheorist on March 09, 2005, 12:13:53 AM
Post by: conflicttheorist on March 09, 2005, 12:13:53 AM
Kerker Slip on. I think I'm the only one in the world who has one. http://get.yourfile.net/?on35539
Title: Exhaust...... Poll
Post by: tdan553527 on March 09, 2005, 06:12:13 AM
Post by: tdan553527 on March 09, 2005, 06:12:13 AM
Quoteweaselnoze Posted
we should have a thread where everyone posts a picture of their wileyco. lol there are so many..
Yea, I would like to see other peoples also. Heck, let's just start adding them to this thread.
(http://img.photobucket.com/albums/v300/tdan553527/IM0009691.jpg)
Title: Oddly
Post by: The Buddha on March 09, 2005, 08:15:50 AM
Post by: The Buddha on March 09, 2005, 08:15:50 AM
Quote from: conflicttheoristKerker Slip on. I think I'm the only one in the world who has one. http://get.yourfile.net/?on35539
I had one on my 89 ... sold now but still hanging around while I reluctantly pass it on to the new owner ... can was meant for a old Ninja 900 ...
Cool.
Srinath.
Title: Exhaust...... Poll
Post by: dgyver on March 09, 2005, 08:43:13 AM
Post by: dgyver on March 09, 2005, 08:43:13 AM
Too bad there is not an option to actually create a real poll in this forum.
Title: Exhaust...... Poll
Post by: pprider on March 09, 2005, 09:05:57 AM
Post by: pprider on March 09, 2005, 09:05:57 AM
I got a Vance and Hines full exhaust
Title: Exhaust...... Poll
Post by: Susuki_Jah on March 09, 2005, 09:27:17 AM
Post by: Susuki_Jah on March 09, 2005, 09:27:17 AM
Quote from: RashadFULL V&H... came with the bike, and i love how it rusts after you paint it.. looks custom. :x
same exact deal, I think CSF worksto paint it with
Title: Exhaust...... Poll
Post by: Cusimano on March 09, 2005, 12:32:48 PM
Post by: Cusimano on March 09, 2005, 12:32:48 PM
sorry, srinath it seems this thread brought up a lot of touchy subjects on waiting for parts.
Sounds like a good idea to post pics of your exhuast.
Sounds like a good idea to post pics of your exhuast.
Title: Exhaust...... Poll
Post by: juno on March 09, 2005, 06:13:46 PM
Post by: juno on March 09, 2005, 06:13:46 PM
QuoteStock with a 70mph gravity/stupidity ground down flat side that's rusting.
Hey! I have that one too! It actually sounds better than stock, but looks like crap.
Title: Exhaust...... Poll
Post by: animal mother on March 09, 2005, 06:49:29 PM
Post by: animal mother on March 09, 2005, 06:49:29 PM
stock, freshly repainted today with high-temp grill paint :mrgreen:
Title: Nope ...
Post by: The Buddha on March 09, 2005, 10:27:38 PM
Post by: The Buddha on March 09, 2005, 10:27:38 PM
Quote from: Cusimanosorry, srinath it seems this thread brought up a lot of touchy subjects on waiting for parts.
Sounds like a good idea to post pics of your exhuast.
Yea now its the postal system that had to be blamed ... :lol: ...
Cool.
Srinath.
Title: geez
Post by: Blingmasta on March 23, 2005, 07:43:06 PM
Post by: Blingmasta on March 23, 2005, 07:43:06 PM
I've been lookin around, tryin to find a sound clip of the wileyco but I CAN'T FIND ONE! :x I was pretty sure I'd heard one before on here but I may have had some crazy stuck in my ear. somebody post one or send me a link to the thread that has it. THANKS
Title: Exhaust...... Poll
Post by: gavin on March 24, 2005, 12:14:40 AM
Post by: gavin on March 24, 2005, 12:14:40 AM
WileyCo w/ Srinath SS flange and restrictor plate :) in the closet :(
Title: Exhaust...... Poll
Post by: davipu on March 24, 2005, 12:57:53 AM
Post by: davipu on March 24, 2005, 12:57:53 AM
open super trapp with modded stock header.
Title: Exhaust...... Poll
Post by: Dom on March 24, 2005, 01:09:32 AM
Post by: Dom on March 24, 2005, 01:09:32 AM
davipu, were you the one that bought the super trapp off ebay about 5 or 6 months ago? I know that someone here bought it just can't remember who.
Title: Exhaust...... Poll
Post by: aplitz on March 24, 2005, 01:26:15 AM
Post by: aplitz on March 24, 2005, 01:26:15 AM
I had a Jardine full system on my '01. Pics at: //www.pbase.com/aplitz Sold the bike, got a TL1000S, the dealership is throwing in a stainless/titanium Yosh full system (in the mail). I can't wait. MMmmmmm......v-twin,.....Yosh,.......titanium.
Title: Exhaust...... Poll
Post by: davipu on March 24, 2005, 01:37:30 AM
Post by: davipu on March 24, 2005, 01:37:30 AM
nope wasn't me. I got mine from Blueknyt.
Title: Exhaust...... Poll
Post by: V8Pinto on March 24, 2005, 08:14:58 AM
Post by: V8Pinto on March 24, 2005, 08:14:58 AM
Open Supertrapp with modified stock header. Freakin' love it man..
Title: Exhaust...... Poll
Post by: Zilla on March 24, 2005, 09:04:05 AM
Post by: Zilla on March 24, 2005, 09:04:05 AM
Crusty Vance and Hines. Fits right in with the rest of the bike, for now.
Title: Exhaust...... Poll
Post by: jordanearl on March 24, 2005, 04:50:14 PM
Post by: jordanearl on March 24, 2005, 04:50:14 PM
another nemby question, but how do u know if ur exhaust is a full, or a slip on. Its a yoshimura. It was on bike when i bought it. i have a pic, but don't know how to add them to the posts.
Title: Exhaust...... Poll
Post by: Focer on March 26, 2005, 04:04:47 PM
Post by: Focer on March 26, 2005, 04:04:47 PM
Just got my Wileyco on. I love it! With the added sound from the lunch box... nice little boost in HP. Looks good too, I clear coated my flange insted of painting black.
Will post pics soon
Will post pics soon