anyone taken off the front sprocket... looks like it is attached wierd?
i've taken mine off from my '93 and it has a c-clip that clips into a notch on the shaft. while you're there, you should think about dropping a tooth to a 15 tooth. i did and it adds a bit of extra quickness to the bike :cheers:
well then you will like what I bought.
15 tooth sprocket and a 45 tooth rear sprocket.
vs the stock 16 front and 39 rear im installing this today with lots of pics
The stock ratio is 2.4
15t up front, stock rear is 2.6
15t up front and 45t in rear is 3
14t up front and stock rear is 2.7
13t up front and stock rear is 3
If they sell a 13t for up front you won't have to buy a longer chain. Get ready for a crazy wheelie machine.
gonna have some fun :) . I just need to go to my parents house and get my link popper tool or whatever you call it. to get the old chain off.
I have a 14t and a 15t that i just ordered from parts unlimited. Hopefully a 14t will bring my little beast up. lol. Hopefully it aint to hard to change.
the front sprocket was super easy i didnt even realize it had a clip untill splatt told me. i had a long day yesterday and was out of it so didnt cross my mind HOW easy it was to do. I went to pick up a car I bought and the dude had lied about it so I wasted 70$ in gas and a 6 hour trip to PA and 6 hours back. so i was still out of it .
but it takes like a minute to change. its a C clip usually you need a special C clip tool but you can use real small needle nose pliers to spread it.
i will post pics up in a few hours
k, cool thx
ok , when i bought my chain from bike bandet they said the JT sprocket I go would still use the 110 link chain. I know someone on the board siad i would probly have to have a longer chain but I stayed with what the store said and ordered it. its about 2-3 links short I mean I could make it tight but then it wouldnt be right. pisses me off. :x
Do we still get pictures?
yes you guys still get pics :) . well i cant return the chain so im putting my stock rear sprocket back on and still keeping the front 15 tooth one.
I will put the 45 tooth rear back on when i have an extra 88$.
i will tell you it is annoying taking off the stock chain, you have to take off the swing arm. not a big deal but still annoying.
you know i work on my motorcycle and my cars so much i think im gonna get a job as a mehcanic. seriously!
I will have pics up about 9pm eastern standard time
isnt 1130 eastern now? wtf is going on here!! haha
sorry about that , had lunch with the parents then got lazy and still left my key at there house!! here are some pics.
(http://home.comcast.net/~jjvphotography/moto/15t.jpg)
(http://home.comcast.net/~jjvphotography/moto/15t16t.jpg)
(http://home.comcast.net/~jjvphotography/moto/39t45t.jpg)
(http://home.comcast.net/~jjvphotography/moto/jtonwheel.jpg)
there is a considerable amount of weight difference between the stock or OEM parts vs the performance parts made out of the aluminium vs the stock steel parts. I cant wait to have extra money on the side again to purchase another chain :( > whatever after i get my car fixed I will buy a longer chain. then keep the OEM parts and chain as spare parts for long road trips just incase.
(http://home.comcast.net/~jjvphotography/moto/newparts.jpg)
Sweet. Thanks
since I dropped one tooth in the front and gained 6 teeth in the rear then I would say I need a 114 chain with a master link.
the Job really takes no time. hope some of you guys have air tools, makes it alot faster. tomorrow I hope to ride it and tell you how she feels with the 15t in the front and stock in the rear then a few weeks down the road i will ride it with the 15t in front and 45t in the rear. I think after this mod im gonna get the buell lights for the front.
That's the same 15t I bought. You'll notice the differene right away. I've been looking for a 39t gold rear sprocket...there's something about gold...makes me feel RICH! :thumb:
And if you were wondering, I'm planning on getting a gold chain to match. :mrgreen:
Cool, I have a 43t rear on my bike. Someday when I have the extra few dollars Im going down to a 15 in the front. Just be sure and not let that cush drive fall out of that wheel when moving it around, thats a good way to bend sprockets, trust me. Also keep an eye out on ebay, I got a new RK o-ring chain for $50 shipped, and it was 120 links so you can just cut it down to fit.
awesome!
thanks for the advice. how does the 43t feel to you?
after reading this post yesterday i got the itch, so i ordered myself a 13t sprocket. can't wait to get it and install it. should be fun. :thumb:
I think it pulls harder but I am biased toward that since I did so many additional things to help the bike run better.
yea my bike runs great. the tank had just been relined the biek had been painted and the carbs freshly jetted. the vance and hines exhuast was semi new. swaping the sprockets should do me better now.
ive decided to buy some connecting links to make the chain a 115 chain
will this fit me 03 GS?
http://cgi.ebay.com/ebaymotors/ws/eBayISAPI.dll?ViewItem&rd=1&item=4538027542&category=35600
and
http://cgi.ebay.com/ebaymotors/ws/eBayISAPI.dll?ViewItem&rd=1&item=4539287156&category=35600
yes they will both fit, two of us in this thread are running the answer 15t sprocket. I imagen the JT is the same thing. buy from that ebayer too he is good to deal with . that is who i bought from. the Answer sprocket sais it was from the UK.
I just took a 3am ride on the bike after getting everything back together. it feels so much smoother now, and hardly any lag into the lower RPM's when you shift , i guess i can thank the 15t sprocket for that one. still I want more out of the bike so I will be buying a 520-115 chain soon .
if anyone wants to buy the new 110 chain I got for cheep when i sale it ill be selling it for a pretty good deal. and it will be put together already.
but the 03 front sprockets are different...will it fit?
i dont see why they wouldnt i mean its technically the same motor right? aslong as the splines on the crank are the same you will fine. maybe your right though. I am looking on some bike shops and it looks like the front sprockets are different in price. wel id say try it , if it didnt work sell it to a 93-gs ... yours should be the same as 94+ right?