ok i finally took out my airbox and put in a k&n lunchbox. there is a hose that comes off the top of the engine and connects to the airbox. Now that the box is no longer there, what the heck do i do with the hose? :dunno:
Thats the breather hose, what I did is put the stock on back on, then got a coupler and a smaller hose and ran it out the bottom of the bike. You can also put a breather filter on it and then set it on top of the new air filter. You could also get one long hose to run out the bottom of the bike, just do something otherwise you might have a mess of oil under your tank.
cool thanx. :thumb: would happen to know the size of that hose?
OK you had me rejet it for the Lunch box ??? I dont remember ... That sheet of paper you sent me is what I did ... if its not for lunch box ... get a pair of 150 main jets large round slotted ... and swap those out.
Cool.
Srinath.
i'm not sure what i wrote on the paper. i know i pm'd you about it though. btw everything fits great, looks awesome. :thumb:
Well I did what was in that print out ... open it and see ... better be sure. I forget ... whihc is why I ask for write up/print out with carbs from people man ... I cant look at the net when working on stuff ... If its all apart its a 2 min job. Heck even after it wont take you more than 5 mins with the allen head float screws ...
Cool.
Srinath.
Quote from: stevemac12073i'm not sure what i wrote on the paper. i know i pm'd you about it though. btw everything fits great, looks awesome. :thumb:
FOOOMPT!
(sound of head, entering sand).
ok so i don't mess anything up, how do i get them out and how can i tell the difference? the carbs and filter are back on the bike.
OK Take allen screws off the floats ad take off floats and look at the main jet numbers ... You may need a small mirror ... if it says 150 you are good. If 125 get a pair of 150's from a bike shop, or put air box and paper filter back in.
Cool.
Srinath.
alright, cool thanx again for everything. i'll post some pics when she is all done.
Quote from: Jake DQuote from: stevemac12073i'm not sure what i wrote on the paper. i know i pm'd you about it though. btw everything fits great, looks awesome. :thumb:
FOOOMPT!
(sound of head, entering sand).
Shuuuuuuuuuuddddd up ....
Cool.
Srinath.
Those allen head float bowl screws should come stock, they saved me alot of work already and Ive only had them on there for a month.