the bike has...
stock pipe
K&N lunchbox
147.5
2 washers
the throtle cable is connected and is adjusted properly.
the bike will idle between 7K-8K rpm with the mix screw adjusted 1 turn out to 4 turns out.
suggestions?
please give me a call or post up!
chris<pixelmonkey>:D
go back to one washer
Got it
chris<pixelmonkey>:D
good now go fix your carbs
You need a pipe and 150's ... in any case get it sorted out and post back so we'll know what works in that setup.
Cool.
Srinath.
thanks for the replys
the adjuster i had set for the throtle cable was a little tight. added some lube and worked it back and forth a bit and it sat down to where it should. it's now idling at 1100 rpm and sounding nice!
this is the stock 96 bike i listed in cycletrader and didnt want to add the expense to a bike that i know would be to prep and sell.
everything is working perfect on the bike and the carb setup was exact on!!!
thanks gstwin.com!!!
chris<pixelmonkey>:D