Print Page - GS500F Handlebars

Title: GS500F Handlebars
Post by: lynnloves739 on May 11, 2005, 07:49:30 AM

I have to GS500F, 2004, and I am interested in lowering the handlebars so they have more of a traditional sportbike, aggressive handlebar look. Do any of you know if they make "clip-ons" for the GS500F or how I would go about doing that? I have heard of someone putting on the SV650 bars, but I don't know how, and I want to tell my fiance how to do it for me, or at least give him some ideas.

Thanks.

lynda

Title: GS500F Handlebars
Post by: cozy on May 11, 2005, 07:52:51 AM

Welcome to gstwin.
Do a search. There's a zillion handlebar threads. Quickest way to find what you're looking for.
:cheers:

Title: GS500F Handlebars
Post by: lynnloves739 on May 11, 2005, 07:57:10 AM

Ya know I looked for a search button and didn't find it until you posted that.

I am such a dope, sorry, I'll do that now.

Thanks.

lynda

Title: GS500F Handlebars
Post by: cheesy on May 11, 2005, 08:23:52 AM

basically you have a couple options.

srinath makes a replacement bar for the 04 that gives a MUCH better look and feel than stock. You literally unbolt your bar and bolt the new one on.

He also used to (still may?) make clip ons. I'd prefer the replacement bar though myself.

You can also try and find an 89 triple. This, IMO is the best option, but usually pricey and a little more difficult to fit.

Title: GS500F Handlebars
Post by: '04gs500f on May 11, 2005, 10:30:15 AM

yeah sriny makes clipons but i swapped his clipons for his 4 weld bar, will look much better

your other option is what i plan to do ;)

sell my 04 front end and buy a gsxr frontend =O

then i can have real clipons!!! :?

:thumb: :thumb:

Title: wait a sec ...
Post by: The Buddha on May 12, 2005, 07:53:22 AM

Hey 04GS500F ...
I thought you wanted flange for clip on ... 4 welds I can send tonight ...
Cool.
Srinath.

Title: GS500F Handlebars
Post by: bambams247 on May 26, 2005, 08:31:39 AM

links to where I can buy these handlebars? ANd I might just order plain handlebars doesna nyone know our sizes???

Title: Out
Post by: The Buddha on May 26, 2005, 12:26:12 PM

I am out of all bars ... watch this space ... as soon as flanges get done bars are next. 2 and 4 weld ... 4 weld type with 2 weld is my goal ... lemme see ... And read the notice at the top about srinath bar.
Cool.
Srinath.

Title: GS500F Handlebars
Post by: Stephen072774 on May 26, 2005, 12:31:16 PM

http://www.suburban-machinery.com/GS500F.htm

Title: GS500F Handlebars
Post by: fettcols on May 27, 2005, 05:57:48 AM

Don't bother trying the '89 GS clipon's on your '04... They're too close to the tank...

Title: GS500F Handlebars
Post by: cheesy on May 27, 2005, 06:18:33 AM

Quote from: fettcolsDon't bother trying the '89 GS clipon's on your '04... They're too close to the tank...

unless you get srinath to make you custom bars that have a slight outward bend. (like I did..)

GStwin.com GS500 Message Forum

Main Area => General GS500 Discussion => Topic started by: lynnloves739 on May 11, 2005, 07:49:30 AM