I have a post eariler "poor mans carb jetting"
srinath helped me out alot with some custom drilling.
I have done some reasearch and he mention 1/16 drill bit is close to 150 jetting.
Does anyone know what the bike would run like with a say 158 jetting basiclly that is what a 1/16th drill bit would make
I can get a 1/32 for .7938mm on the pilot jets and only can get ahold of a 1/16 bit which is 1.5875mm
:)srinath if you have any input on this I would be greatful:)
Thanks GROGGGGGGGG:)