Print Page - OK, R1 tail write-up

Title: OK, R1 tail write-up
Post by: DarkCyDE on May 28, 2005, 04:06:44 AM

A few people have asked how to do that R1 tail. I spent a 8 hours taking pics, doing a write-up, building a page and rebuilding the site that the page sits on.
So here it is.........

Go to the link section on this site and look at mikes mods
http://www.pariderz.com

Title: OK, R1 tail write-up
Post by: '04gs500f on May 28, 2005, 05:00:38 AM

very detailed, very nice, and VERY FLUSH looking

Title: OK, R1 tail write-up
Post by: Frost on May 28, 2005, 09:46:45 AM

THANKS...

but one thing...do you think it can support a passenger?

Title: OK, R1 tail write-up
Post by: DarkCyDE on May 28, 2005, 10:09:02 AM

Really if you think you would like to carry people around on your bike, you might just want to get one of those slip on tails that box in the rear seat. I wouldnt want to put anyone on the back without making hoop brackets for the top pad to bolt to.

Title: OK, R1 tail write-up
Post by: Frost on May 28, 2005, 01:28:21 PM

thanks again..................but it looks so cool :(

Title: OK, R1 tail write-up
Post by: DarkCyDE on May 28, 2005, 03:39:52 PM

It wouldnt be hard to correct all you would have to do is make something that looks like this.
(http://www.pariderz.com/rearseatbrace.JPG)

GStwin.com GS500 Message Forum

Main Area => General GS500 Discussion => Topic started by: DarkCyDE on May 28, 2005, 04:06:44 AM