I lost my manual, does anyone know what to torque the cam bolts to on an 89??
Engine, clutch and transmission torque settings
Engine mounting bolt nuts.................................60 to 72 Nm
Right-hand side frame downtube bolt nuts........25 to 38 Nm
Valve cover bolts................................................13 to 15 Nm
Camchain tensoner bolts....................................6 to 8 Nm
Rear camchain quide bolts..................................4 to 7 Nm
Camshaft sprocket bolts.....................................17 to 19 Nm
Camshaft jounal cap bolts..................................8 to 12 Nm
Cylinder head 10 mm domed nuts......................35 to 40 Nm
Cylinder head 6 mm bolt.....................................8 to 12 Nm
Clutch nut...........................................................40 to 60 Nm
Clutch pressure plate bolts.................................4 to 6 Nm
Oil pump screws..................................................8 to 12 Nm
Starter clutch Allen bolts.....................................15 to 20 Nm
Sump (oil pan) bolts............................................12 to 16 Nm
Oil pressure regulator.........................................17 to 20 Nm
Crankcase bolts
- 8 mm bolts........................................................20 to 24 Nm
- 6 mm bolts........................................................9 to 13 Nm
Primary drive gear nuts.......................................90 to 110 Nm
Balancer shaft end bolts.....................................35 to 46 Nm
Connecting rod nuts
- Initial setting.....................................................22 to 28 Nm
- Final setting......................................................30 to 34 Nm