Title: Installing the WileyCo (pics)
Post by: Ry_Guy on June 24, 2005, 07:23:05 PM
Post by: Ry_Guy on June 24, 2005, 07:23:05 PM
Here it is.
The stock pipe. Use your new pipe cutter and cut it 2 inches past the weld, towards the exhaust.
(http://i2.photobucket.com/albums/y36/JohnnyFontane/Wiley1.jpg)
(http://i2.photobucket.com/albums/y36/JohnnyFontane/Wiley2.jpg)
Fitting the flange on takes a little sandpaper, whacking around, and a couple beers. Probably the hardest part. After you install the entire exhaust back on the bike, you'll need to jostle it around some more before bolting on the WileyCo can.
(http://i2.photobucket.com/albums/y36/JohnnyFontane/Wiley3.jpg)
Presto. Rejet the carbs and upgrade your air filter.
Then put on your NEW WILEYCO HAT, WILEYCO KEYCHAIN, and WILEYCO SHIRT!
Gee, Thanks WileyCo!
(http://i2.photobucket.com/albums/y36/JohnnyFontane/WileyCo.jpg)
And thanks to Srinath too! Sorry no pic available for you man. But I don't think you'll mind.
And thanks to Eva for moral support.
(http://i2.photobucket.com/albums/y36/JohnnyFontane/GShelper.jpg)
I had more than a couple beers.
The stock pipe. Use your new pipe cutter and cut it 2 inches past the weld, towards the exhaust.
(http://i2.photobucket.com/albums/y36/JohnnyFontane/Wiley1.jpg)
(http://i2.photobucket.com/albums/y36/JohnnyFontane/Wiley2.jpg)
Fitting the flange on takes a little sandpaper, whacking around, and a couple beers. Probably the hardest part. After you install the entire exhaust back on the bike, you'll need to jostle it around some more before bolting on the WileyCo can.
(http://i2.photobucket.com/albums/y36/JohnnyFontane/Wiley3.jpg)
Presto. Rejet the carbs and upgrade your air filter.
Then put on your NEW WILEYCO HAT, WILEYCO KEYCHAIN, and WILEYCO SHIRT!
Gee, Thanks WileyCo!
(http://i2.photobucket.com/albums/y36/JohnnyFontane/WileyCo.jpg)
And thanks to Srinath too! Sorry no pic available for you man. But I don't think you'll mind.
And thanks to Eva for moral support.
(http://i2.photobucket.com/albums/y36/JohnnyFontane/GShelper.jpg)
I had more than a couple beers.
Title: Installing the WileyCo (pics)
Post by: 94suzuki500 on June 24, 2005, 07:49:12 PM
Post by: 94suzuki500 on June 24, 2005, 07:49:12 PM
coolio, you are a true success story
before wileyco gear and can.... :(
after wileyco gear and can.... 8)
before wileyco gear and can.... :(
after wileyco gear and can.... 8)
Title: Installing the WileyCo (pics)
Post by: MR_PINK on June 24, 2005, 08:00:44 PM
Post by: MR_PINK on June 24, 2005, 08:00:44 PM
:lol: nice pics
Title: Re: Installing the WileyCo (pics)
Post by: calamari on June 24, 2005, 08:13:15 PM
Post by: calamari on June 24, 2005, 08:13:15 PM
Quote from: Ry_GuyThen put on your NEW WILEYCO HAT, WILEYCO KEYCHAIN, and WILEYCO SHIRT!and pull your zipper up too :roll:
great pics btw :thumb:
Title: Re: Installing the WileyCo (pics)
Post by: The Buddha on June 24, 2005, 09:07:14 PM
Post by: The Buddha on June 24, 2005, 09:07:14 PM
Quote from: subcQuote from: Ry_GuyThen put on your NEW WILEYCO HAT, WILEYCO KEYCHAIN, and WILEYCO SHIRT!and pull your zipper up too :roll:
great pics btw :thumb:
Hey this guy's a smarty pants ... You are right up there with my favorite newbie ... OK you're right behind him ... he's the Genius that said "Peetey Pablo" ... on his first post ... You know who you are ... :lol: :lol: :lol:
Cool.
Srinath.
Title: Installing the WileyCo (pics)
Post by: calamari on June 24, 2005, 09:36:27 PM
Post by: calamari on June 24, 2005, 09:36:27 PM
so a bit of humor is not welcomed in this forum? :oops:
Title: Installing the WileyCo (pics)
Post by: Kerry on June 24, 2005, 09:44:59 PM
Post by: Kerry on June 24, 2005, 09:44:59 PM
You did just fine. Welcome, by the way! :)
Title: Installing the WileyCo (pics)
Post by: vfrocket on June 24, 2005, 10:50:14 PM
Post by: vfrocket on June 24, 2005, 10:50:14 PM
Great photos, I will be installing mine as soon as I recieve my flange from srinath. Thanks for the info, i cant wait to put mine on, and the K&N pod, and the stage 3 jet kit and see how it runs!!!
One question though, what do you do about the centerstand stopper?? There is not one on the new flange?
VFR
One question though, what do you do about the centerstand stopper?? There is not one on the new flange?
VFR
Title: Installing the WileyCo (pics)
Post by: Venom on June 24, 2005, 10:57:34 PM
Post by: Venom on June 24, 2005, 10:57:34 PM
Got mine done today. Installed the wileyco, K&N Luchbox, and rejetted. Can't wait to take it for a ride!!!!
Title: Installing the WileyCo (pics)
Post by: Ry_Guy on June 25, 2005, 12:49:32 PM
Post by: Ry_Guy on June 25, 2005, 12:49:32 PM
QuoteOne question though, what do you do about the centerstand stopper?? There is not one on the new flange?
Good question. The centerstand stopper had to come off with the stock exhaust. I haven't really done anything about it. It seems to rest fine on the frame. Not sure if that's a good idea or bad, but I'll find out.
Title: Installing the WileyCo (pics)
Post by: '04gs500f on June 25, 2005, 03:53:30 PM
Post by: '04gs500f on June 25, 2005, 03:53:30 PM
wileyco only gave me a hat and pin...
but thats ok,
when srinath finally gets around to sending out my flange i will get the free srinath preworn (by srinath) thong :thumb:
but thats ok,
when srinath finally gets around to sending out my flange i will get the free srinath preworn (by srinath) thong :thumb:
Title: Installing the WileyCo (pics)
Post by: jakkyl on June 25, 2005, 09:08:31 PM
Post by: jakkyl on June 25, 2005, 09:08:31 PM
Where do you get the Wileyco from?
Title: gs500f aftermarket exhaust
Post by: ginoe on June 28, 2005, 06:51:24 AM
Post by: ginoe on June 28, 2005, 06:51:24 AM
:cheers: thank god!
a newly dated thread for an aftermarket exhaust...
i want one too!!!
a newly dated thread for an aftermarket exhaust...
i want one too!!!
Title: Installing the WileyCo (pics)
Post by: Maireeka on June 28, 2005, 07:12:55 AM
Post by: Maireeka on June 28, 2005, 07:12:55 AM
that's awesome! great hat!
By the way, I'm a carb n00b (only worked on cars with EFI or CIS systems before I got into bikes), and what exactly does rejetting entail?
Is it just replacing the jets on the carbs with different ones?
By the way, I'm a carb n00b (only worked on cars with EFI or CIS systems before I got into bikes), and what exactly does rejetting entail?
Is it just replacing the jets on the carbs with different ones?
Title: Installing the WileyCo (pics)
Post by: weaselnoze on June 28, 2005, 11:46:45 AM
Post by: weaselnoze on June 28, 2005, 11:46:45 AM
that and putting a washer on the needle. its really easy
Title: Re: Installing the WileyCo (pics)
Post by: dgyver on June 28, 2005, 12:07:46 PM
Post by: dgyver on June 28, 2005, 12:07:46 PM
Quote from: subcand pull your zipper up too :roll:
That is one thing a guy should never say to another guy, unless.....
Title: Re: Installing the WileyCo (pics)
Post by: phire on June 29, 2006, 11:43:01 AM
Post by: phire on June 29, 2006, 11:43:01 AM
Quote from: dgyver on June 28, 2005, 12:07:46 PMQuote from: subcand pull your zipper up too :roll:
That is one thing a guy should never say to another guy, unless.....
Never tell a guy his zipper is down. It's his problem - you didn't see anything.
Title: Re: Installing the WileyCo (pics)
Post by: LimaXray on June 29, 2006, 12:18:27 PM
Post by: LimaXray on June 29, 2006, 12:18:27 PM
idk if you got the memo or not, but it's 2006 :laugh:
thats ok, srinath is selling flanges again so maybe this is a relevant thread
thats ok, srinath is selling flanges again so maybe this is a relevant thread
Title: Re: Installing the WileyCo (pics)
Post by: phire on June 29, 2006, 10:45:01 PM
Post by: phire on June 29, 2006, 10:45:01 PM
Quote from: LimaXray on June 29, 2006, 12:18:27 PM
idk if you got the memo or not, but it's 2006 :laugh:
thats ok, srinath is selling flanges again so maybe this is a relevant thread
lol I got linked here from his new thread about making flanges, I didn't even bother to look at the date.