I need to drain my fuel lines and carbs because I wrecked the bike and need to take all the gas out so it doesn't screw up my fuel system.
What is the easiest way to drain them? And when I'm ready to put gas back in them will I have to mess with the float bowls, or can I just gas it up and go.
-BigTwin-
the drain screw on the bottom of the float bowl. then each line. in a couple hours Kerry will drop in with the picture of it. :)
Lighter...
Sorry... I couldn't help it. :dunno:
Quote from: daviputhe drain screw on the bottom of the float bowl. then each line. in a couple hours Kerry will drop in with the picture of it. :)
Gee ... now I feel obligated! :roll:
Here is what the
drain screw and
drain spout look like on a pre-'01 GS. The later models should be similar.

For more details on the process, see the
Float Height Check page. Instead of turning the open end of the hose up, just direct it into a fuel-suitable container. Unless you want to (slowly) drain your entire fuel tank through the carbs, turn off the petcock under the fuel tank first.
GO KERRY :) Your pics are always helpful.
Kerry, your pics always make life about 10 million times easier.
THANKS, BigTwin