Text only | Text with Images

GStwin.com GS500 Message Forum

Main Area => General GS500 Discussion => Topic started by: Roadstergal on July 19, 2005, 12:29:14 AM

Title: West Seattle, my bike gets mooned, my floor...
Post by: Roadstergal on July 19, 2005, 12:29:14 AM
West Seattle.

(http://www.roadstergal.info/7_18_05/332.jpg)

(http://www.roadstergal.info/7_18_05/336.jpg)

(http://www.roadstergal.info/7_18_05/347.jpg)


Mooned.

(http://www.roadstergal.info/7_18_05/366.jpg)


And waiting for installation - if everything works out, tomorrow:

(http://www.roadstergal.info/7_18_05/380.jpg)
Title: West Seattle, my bike gets mooned, my floor...
Post by: davipu on July 19, 2005, 01:29:25 AM
first two your in the red x zone.  that's a ten yard penalty repeat 2nd down.  so how long did you wait for the flange?
Title: West Seattle, my bike gets mooned, my floor...
Post by: Roadstergal on July 19, 2005, 01:36:58 AM
You have an impatient connection - right click and Show Picture.  I waited about half an hour to make sure it was dry... :P
Title: West Seattle, my bike gets mooned, my floor...
Post by: vfrocket on July 19, 2005, 04:25:25 AM
great pics.. that is the exact same paint I used on my flange, it will work well on the rest of the header as well, may as well since you are going to have it off anyway...
Title: West Seattle, my bike gets mooned, my floor...
Post by: Blazinjr on July 19, 2005, 05:41:50 AM
Quote from: davipufirst two your in the red x zone.  that's a ten yard penalty repeat 2nd down.  so how long did you wait for the flange?

I ordered mine on 5-21, still waiting.
Text only | Text with Images