Print Page - Flush mount turn signals?

Title: Flush mount turn signals?
Post by: blue05twin on July 20, 2005, 07:06:44 AM

Hello everyone this must seem like a really silly question but here goes. Are most flush mount turn signal's universal? Or are there one made for the GS500F's?
Thanks in advance

Title: Flush mount turn signals?
Post by: SheDevil18 on July 20, 2005, 07:08:14 AM

I just ordered Lockhart Phillips flush mounts for my bike. Part Number 122-9752

Title: Flush mount turn signals?
Post by: airbrush on July 20, 2005, 09:25:42 AM

I make a gasket set so you dont have to hack up your fairings, just raises them up...here's the link

http://www.gstwins.com/forum/viewtopic.php?t=14537&highlight=

Title: Flush mount turn signals?
Post by: number1 on July 20, 2005, 12:29:45 PM

so your saying that if i puy these gaskets from you i wont have to drill into my fairings at all. and if this is true can you make me a set and if so how much and where can i get the turns at.

thanks
dave

Title: Flush mount turn signals?
Post by: number1 on July 20, 2005, 12:36:15 PM

are these the same ones you got :dunno:

http://cgi.ebay.com/ebaymotors/ws/eBayISAPI.dll?ViewItem&item=4560855859&ssPageName=MERC_VI_ReBay_Pr4_PcY_BIN_Stores

Title: Flush mount turn signals?
Post by: airbrush on July 20, 2005, 01:06:05 PM

The brand i have is K&S...but lockhart phillips would be the same measurement wise etc, they're all pretty similar.
Thats right, you won't have to cut or drill into your fairing, thats why i made them. What you'll have to do is take the big plastic keyed washer off your stock signals and flip them to the inside. Just drill a couple holes through that and through the new signals. Get some long small bolts and bolt them on. You may need to extend the wiring off them if they're not long enough.
I can make you a set for $10 canadian and shipping.

Title: Re: Flush mount turn signals?
Post by: ImJustPondering on July 20, 2005, 05:02:59 PM

Quote from: blue05twinHello everyone this must seem like a really silly question but here goes. Are most flush mount turn signal's universal? Or are there one made for the GS500F's?
Thanks in advance

I would have to say yes but depending on how big it is.

I have these on my bike:
LOCKHART FLUSH MOUNT IV
http://www.parts411.com/acb/showdetl.cfm?&DID=9&Product_ID=59696&CATID=56.0

I originally posted about installing them here:
http://www.gstwins.com/forum/viewtopic.php?t=19275

You can view a faq I wrote up here:
http://photobucket.com/albums/b171/ImJustPondering/?action=view&current=gs500f_FenderTurnSignals.jpg

Title: Flush mount turn signals?
Post by: number1 on July 20, 2005, 09:37:36 PM

pm sent

Title: Flush mount turn signals?
Post by: fettcols on July 21, 2005, 12:33:00 AM

I like the little LP flushmounts... I put those on mine last year and they look good but don't offer much of a signal to oncoming traffic. I was thinking about adding some LED lights up under the fairing but haven't got around to it yet.

GStwin.com GS500 Message Forum

Main Area => General GS500 Discussion => Topic started by: blue05twin on July 20, 2005, 07:06:44 AM