Text only | Text with Images

GStwin.com GS500 Message Forum

Main Area => General GS500 Discussion => Topic started by: rclz on July 26, 2005, 03:58:56 PM

Title: fried my signals?
Post by: rclz on July 26, 2005, 03:58:56 PM
I just installed flush mount signals for the front and i accidently let the two metal connectors that went to the same signal come in contact while the signal is on, now none of my signals work and when i activate a signal not even the light on the instrument panel doesnt blink. What should i do?
Title: fried my signals?
Post by: Susuki_Jah on July 26, 2005, 04:00:20 PM
check your fuses, if that is not the problem check your relay. you could have blown either one.
Title: fried my signals?
Post by: rclz on July 26, 2005, 04:10:46 PM
fuses, I am only aware of one fuse on the 04F?
Title: fried my signals?
Post by: Susuki_Jah on July 26, 2005, 04:14:51 PM
Quote from: rclzfuses, I am only aware of one fuse on the 04F?

there must be a relay on the bike. i dont have my book with me and I havnt taken apart the bike yet to check. but turning signals need a relay of some sort to work.
Text only | Text with Images