I've searched and found mixed reviews about jetting the 2001-up GS500(F).
After fixing up my bike it will have a full Jardine/Vance and Hines pipe, Bob B Advancer, and Lunchbox or Pod Filters (which is the best of the 2).
I live in Ohio, don't know if weather plays a role though.
I want smooth power throughout all rpm's (no flat spots), quick warm-up times (minimal/no use of choke, not sure if possible though), and faster.
THANKS, Carb NOOOOOOOOOOOOOOB -BigTwin-
read my sig...i love my setup...
Do you have to use the choke for long?
And what would be the difference between your setup and the one pantablo recommends:
Pilot #20 bleed type
Small Main #67.5 round slotted
Large Main #147.5 round slotted
And what do you do about the mixture screw (or whatever screw has to be a certain # of turns out)? And what about the washers?
I'm a complete IDIOT with carbs, so please forgive my ignorance. Where is the screw and what jet gets the washers?
THANKS, BigTwin
I took mine to a shop to be jetted and dyno tuned. If you don't want to mess with it, take it to extreme down on refugee/104/frank road.. I think it cost me like $130 or $160... something like that (brought my own jets). They do a before and after dyno run and they have some gizmo that will tell you if you're running lean or rich.
I can PM you the number and the guys name if you're interested.
Quote from: BigTwin
Pilot #20 bleed type
Small Main #67.5 round slotted
Large Main #147.5 round slotted
that's for a different setup...with KN dropin filter i believe...
mine gives LOTS of power and no dead spots...pulls much much harder in 6th on hwy speed...even with stock gearing...
god i dont remember what my jetting is.
But I think i need to shim the needles up one. I got a little 'staggering' at higher speed. I dont know if i got 145 or 147.5 on there.
My signature.. not sure if that's the correct one.
I wanna say ... I am not sure I deserve the best ... Like when the doctor said ... The best thing for you is to stop eating junk food, stop drinking, stop waking/sleeping weird hours, stop drinking espresso, get good exercise and stop riding the bike. I went ... I've been so bad all these years, I am not sure I deserve the best ... :lol:
Cool.
Srinath.
What is the best of the ones listed above to be running with a full exhaust and pod/lunchbox filter? (what's the difference, never seen either of them?)
I just really want it to run smooth and require little to no choke.
THANKS, BigTwin
Pilot #20 bleed type
Small Main #67.5 round slotted
Large Main #147.5 round slotted
Uni pod filters
Vance & Hines Super Sport Exhaust
V&H timing advancer
This is the set-up pantablo recommends, should it be different with K&N pods, don't know if they flow better or not.
Also, are you guys still having long warm-up times?
THANKS, BigTwin
Hey Bigtwin, i was in Iron Pony yesterday. I forgot you worked there. Next time I'm there, I'll look you up. maybe we can go riding