On a tangent here..what is the stock size fuel line?
Posted: Thu Mar 04, 2004 8:29 pm
--------------------------------------------------------------------------------
I just bought some fuel line from Cycle Gear that seems to match perfectly to the original line. I bought Polyurethane Fuel Line 5/16 I.D. x 7/16 O.D. I will let you know if it works.
This is what I bought last year and I haven't had any problems since. I also changed out the stock clamps and used screw clamps. I hope this helps.
Take a trip to your local AP store and get some fuel line. You will need about 4 ft if your replacing all of them. If you get same guage as i got(autozone) be prepared to struggle abit getting both lines on under the tank.
6mm id
lee's cycle racing has it in stock. take the 15 to aero dr west got up about three blocks it's on the right.
They are 7mm ID
http://gstwins.com/forum/viewtopic.php?t=7256
Huh, I did this last night.
I was desperate, and no cycle shops were open that late.
My concern was crimping ( considering the confined routing around the airbox, and tank) I bought the 5/16id fuel injection line. This stuff is pretty thick, and expensive $.33 an inch!, but it worked great. Astheticaly, I am not sure I like it, but you can barely see it.
I got mine from Davipu :mrgreen: and it rocks :thumb: :thumb: Helped fix my starvation prob!
:cheers: