Remember all my posts about lean this, tension that... Appreciate the responses...
The problem with the noise...
NO OIL IN THE ENGINE!!!!! :x
I thought I checked it weeks ago when the noise started, but maybe didn't do it right or the stick rubbed against something oily.
I decided to "top it up" today, and when I checked it there was no oil on the stick. I kept topping it up bit by bit (like half a liter at a time), in my head thinking: "what..... " pour pour... "the....." pour pour... "f....." cause I'd probably only gone about ~1500k since I changed it for the first time since owning it.
Lesson learned. :roll:
Quote from: GSJamesLesson learned. :roll:
I learned this lesson kinda like that, too. :roll: Thank goodness the GS is such a forgiving little beast! :cheers: :mrgreen:
Quote from: GSJamesNO OIL IN THE ENGINE!!!!! :x
Makes me wonder why the Oil level light didn't trip on? Is the bulb good?
you have to get down to about half a Qt for the pump pick up to quit sucking, then when the pressure drops the light comes on. untill then it just runs really hot.
The bike does run quite hot.
I don't have a gauge cluster (but I ordered one!) - so no light :(
And actually - that noise problem that I've been having has come back after I started going for a ride - TAK TAK TAK when the engine is revved up some.
Hope to get it figured out before end of season...
Quote from: starwaltQuote from: GSJamesNO OIL IN THE ENGINE!!!!! :x
Makes me wonder why the Oil level light didn't trip on? Is the bulb good?
Common misconception. The light is for oil *pressure* only and will only light if the pressure drops below a certain amount. You can still get decent pressure with low oil levels, but it's certainly not good for the bike.
Just to finish off this post... I attempted to ride the bike somewhere thinking the TAK-TAK might not be that bad. Then it got worse, lots more noises.
I attempted to ride it home, then the motor stopped. I think I seized a piston or something, because I can't push the bike at all when it's in gear.
The bike doesn't turn over, I think the motor's dead. I suppose the next step is removing the motor and fixing it if it's possible.
Hope to ride in spring...
:(