Print Page - another front brake question

Title: another front brake question
Post by: ninja_steve on January 01, 2006, 10:56:49 PM

i broke the damn bolt that mounts the line to the caliper. once again i doubt the dealer hsa one in stock, but does anyone know the size so i can order it from work?

Title: another front brake question
Post by: gsmetal on January 02, 2006, 06:30:17 AM

Are you talking about the bolt (with hole in it for brake fluid to pass) that mounts the banjo bolt to the master cylinder?

Title: another front brake question
Post by: dgyver on January 02, 2006, 06:38:37 AM

Are you referring to #13, the bango bolt, or #17? If it is #17, then it is the same size that holds the brake line bracket under the lower triple.
http://www.psndealer.com/fiche/images/Suzuki/1989/Motorcycles/2103_47.gif
This is from //www.MrCycles.com

Title: another front brake question
Post by: 500rider on January 02, 2006, 07:51:17 AM

The dealer should have banjo bolts for the lines in stock since these would be common to a variety of bikes. Call around if one doesn't have them. It should be something you can get within a couple days if no one has them in stock.

Title: another front brake question
Post by: ninja_steve on January 02, 2006, 10:11:32 AM

#13. i'm going go dig through dirtbike line kits at work today and hopefully will find one.

GStwin.com GS500 Message Forum

Main Area => General GS500 Discussion => Topic started by: ninja_steve on January 01, 2006, 10:56:49 PM