Text only | Text with Images

GStwin.com GS500 Message Forum

Main Area => General GS500 Discussion => Topic started by: bulletproofcycle on January 15, 2006, 12:45:04 PM

Title: NEED HELP ASAP!!!! Brake Bleeder size
Post by: bulletproofcycle on January 15, 2006, 12:45:04 PM
Appantly all Speedbleeders for Suzukis are the sam, 7mm x 1.0/

Tried to install the 7mm x 1.0 and it was way off, it was too long and didn't thread in.

Anybody know what size fits in a 2004 GS500f?

Thanks
Title: Re: NEED HELP ASAP!!!! Brake Bleeder size
Post by: bulletproofcycle on January 15, 2006, 06:05:43 PM
Anybody know what the stock bleeder is?
Title: Re: NEED HELP ASAP!!!! Brake Bleeder size
Post by: dgyver on January 15, 2006, 07:23:00 PM
Every Suzuki I have dealt with uses 10x1.0

Not sure if the F is the same.
Title: Re: NEED HELP ASAP!!!! Brake Bleeder size
Post by: chefod on January 23, 2006, 08:39:47 PM
i dunno if this is much help but the bolt is 5/16" and  the whole bolt measures 0.97", i used my fathers digital gauge, so i don't know if this helps but good luck!
Text only | Text with Images