howdy,
had a few people ask for photos of magnum exhaust system. finally got of my but and got them done. the third shot is not the best but only full side view of bike with exhaust i have at moment. :thumb:
check them out. have also included a photo of the clip on handle bars i made for the gs. welding is a little ordinary but it was my first attempt so i expected as much. :nono:
(http://img495.imageshack.us/img495/1677/magnumexhaust14bo.th.jpg) (http://img495.imageshack.us/my.php?image=magnumexhaust14bo.jpg)
(http://img495.imageshack.us/img495/3892/magnumexhaust26jg.th.jpg) (http://img495.imageshack.us/my.php?image=magnumexhaust26jg.jpg)
(http://img367.imageshack.us/img367/1056/magnumexhaust31od.th.jpg) (http://img367.imageshack.us/my.php?image=magnumexhaust31od.jpg)
(http://img363.imageshack.us/img363/4035/clipons4xg.th.jpg) (http://img363.imageshack.us/my.php?image=clipons4xg.jpg)
by the way, don't worry the headers look lovely when there new. i have had a few problems with shopping bags hitting my headers when there hot and ending up with that crappy plastic melted to them ! :mad:
Looks good!
And don't be so hard on yourself. That third shot isn't that bad. You can clearly make out both a motorcycle and a rider!
Looks good, that is deffinatly a future mod for me :thumb:
heck yeaa i want it .. link me scotty ! hehe no really . think you can link me ? i need to get a price so i can start saving :)
http://www.formula1mc.com.au/
this is a link to the manufacturers site. don't think there is a picture on the site but. They also do this in a carbon fibre which looks hot. i had carbon first but after a little slide it was trashed. When i reordered the second one they where having problems with the carbon. don't know if they have it sorted yet.
prices from memory in australian dollars (.743 us dollars to 1 aussie dollar, good exchange rate for you guys)
full system with alloy can $650
full system with carbon fibre can $725
hope this helps :cheers:
Quote from: spirit33 on January 18, 2006, 06:44:44 PM
http://www.formula1mc.com.au/
this is a link to the manufacturers site. don't think there is a picture on the site but. They also do this in a carbon fibre which looks hot. i had carbon first but after a little slide it was trashed. When i reordered the second one they where having problems with the carbon. don't know if they have it sorted yet.
prices from memory in australian dollars (.743 us dollars to 1 aussie dollar, good exchange rate for you guys)
full system with alloy can $650
full system with carbon fibre can $725
hope this helps :cheers:
Thats not a bad price. The alloy can looks ok for $75 cheaper.
i think the price is fantastic because the unit is good quality, not cheap and nasty. The second cheapest price i got for a full system for the GS was $1600 from megacycle and their pipe looked crap. I can not speak highly enough of the system. The sound is really deep and throaty. So when you are splitting the traffic they know your coming. Each night when i come home the door is open ready for me as the hear me coming from at least a kilometer away.
Seriously if you want a exhaust sytem for the GS you can't go past it. :thumb:
It will run fine with std filter and jetting but works even better with a few mods.
I am running K&N drop in filter with restrictor removed.
I have lifter my needle 1 setting (aussie model has clip system on needle removing the need for washers) and I have a #130 main jet.
Still need to play a bit but the point is it will run well on any type of GS, totally stock or highly modded.
Good work spirt I was hoping to see some good photos of the system before I bought one can you make a sound clip of it at all? :thumb: :cheers:
BITCHIN AUSSIE EXHAUST ! YOU CAN ALSO FIND A FULL STAINLESS SYSTEM THAT FITS ALL GS 500 s [ YES EVEN 04-05 ] AT [ www.predatormotorsports.co.uk ] PRICE 260.00 BRIT POUNDS ALSO AT THIS TIME THEY HAVE 10% OFF. CHEERS!