Hi guys. Just received my carbs and im aiming to reinstall them asap. I dont have a manual and cant seem to find a how to for this(yes, im working on the manual) Just thought there might be some scanned imageds already on the site somewhere.
Yes there is: http://www.gstwin.com/carb_work.htm
i already saw that. it didnt show specifically were each hose went.
http://www.gstwin.com/fuel_hose_routing.htm
I searched using 'hose routing' with username 'Kerry'.
I doubt they can post copyrighted marterial on this site.
But you may find someone willing to break the law via email. ;)
They could just scan the pages and send them via email. I dunno how non legal that is.
All you have to find is someone with the book. ;)
and a scanner ;)
and email them.
Btw- I am selling cheap gucci socks for $100.00
if your interested in cheap gucci socks email me. THe socks are slightly worn and have been sitting on my scanner for about a month.
:thumb:
thanks guys, im pretty clear on that. Now i need a tutorial as to how to attach the choke cable. any help on that :laugh:(for some reason i can hear seshadri laughing :icon_confused:)
anybody willing to lend a hand?
ok, this is a (crappy) picture of the choke slider mechanism that's attached to the carbs:
(http://i47.photobucket.com/albums/f158/Mandres/chokeslider.jpg)
On the left side, you can see the hole that the nipple on the choke cable fits into:
(http://i47.photobucket.com/albums/f158/Mandres/chokehole.jpg)
The nipple sits in the hole and the cable is routed through the cutout.
Does that help?
-M
yes it does, but does the cable sit in the catch at the other end of the slide?
Here's a pic from the Haynes manual, it should make it clear:
(http://i47.photobucket.com/albums/f158/Mandres/cablerouting.jpg)
-M
thanks man, im going outside right now and take care of that. O0
okay, the how is stating that there is supposed to be a vacuum hose somewhere? its stating the vacuum goes to the left carb? Where? :2guns:
On the inboard side of the carb (right-side of left carb).
are you referring to the top T?
No, it's on the actual body itself. It's a spigot, like the ones on the floatbowls, sticks out, pointing to the right, almost where the carb meets the carb boot (the forward boot; downstream).