I am contemplating the 88-89 GSXR 750 rear wheel swap. I have a 2005 GS500, so my rims are black. What type of paint should I be looking at to match the stock wheels? I wont powdercoat...as I don't have the money. I'm looking for cheap, do-it-yourself paints!
Thanks!
-Turd.
Quote from: Turd Ferguson on March 12, 2006, 11:42:39 PM
I am contemplating the 88-89 GSXR 750 rear wheel swap. I have a 2005 GS500, so my rims are black. What type of paint should I be looking at to match the stock wheels? I wont powdercoat...as I don't have the money. I'm looking for cheap, do-it-yourself paints!
Thanks!
-Turd.
I'm thinking a satin finish spray can paint will work very nicely. Matte black might be too, well, matte. You could also consider a high-temp spray on paint like BBQ paint because it is (I think) more durable than regular spray paint. I'd also go with a clear coat over it to make sure it doesn't get chipped and nicked by gravel and stuff. They sell clear coat in matte and satin finishes as well as gloss finishes, IIRC.
I think Alpha just about covered this, but I want to add that I've had good luck painting wheels with VHT brand high-temperature paint, which I've found on the shelf at the local AutoZone for $7.99. I mainly use it to paint exhaust systems (which is what it is designed for), but since I keep it on hand in flat-black, I've also painted wheels with it. I actually prefer flat-black to semi-gloss, but you could always use the VHT flat as a base-coat to see how well it covers, then paint over it with a glossier paint if you don't like the subdued look from the flat-black.
BTW, I've always thought that the letters "VHT" stand for "Very High Temperature", not that it matters. VHT paint is a PJ1 product, so you know it is a quality paint... very durable in my experience. Just be sure to start with CLEAN wheels; let them warm in the sun for at least an hour before you begin. Don't try to paint if the temps are below ~70F; be patient and wait for the right day and time. You can prep the wheels in the meantime, and find the materials you need in advance, but don't rush the job. Take your time, do it right, and you'll be amazed at the results...