Print Page - Progressive springs! Oil height question and spacer length.

Title: Progressive springs! Oil height question and spacer length.
Post by: bulletproofcycle on May 13, 2006, 03:41:34 PM

I'm about to installed my progressives and have two questions:

What height do I set the fork oil? The manual says 3.79" or something and the progressive instructions say no more than 5.5 "

What length spacer should I put in?

Thanks

Title: Re: Progressive springs! Oil height question and spacer length.
Post by: Alphamazing on May 13, 2006, 03:43:50 PM

http://gstwins.com/gsboard/index.php?topic=25706.0

That gives you a full how-to on how to install your new fork springs, change your fork oil, and make your appropriate preload-spacer measurements.

Title: Re: Progressive springs! Oil height question and spacer length.
Post by: AprilIan on May 14, 2006, 01:47:24 PM

http://gstwins.com/gsboard/index.php?topic=19406.msg178582#msg178582
http://gstwins.com/gsboard/index.php?topic=10540.msg87245#msg87245
Progressive told me to use the stock oil height.

GStwin.com GS500 Message Forum

Main Area => General GS500 Discussion => Topic started by: bulletproofcycle on May 13, 2006, 03:41:34 PM