GStwin.com GS500 Message Forum

Main Area => General GS500 Discussion => Topic started by: Scorpio65 on June 08, 2006, 04:38:15 PM

Title: Chain and Sprocket
Post by: Scorpio65 on June 08, 2006, 04:38:15 PM
Just curious, how long should a new chain & sprocket last? 95 % highway riding average speed of 80ish. 600 miles a week and lubeing the chain every week to week in a half. Its a stock set up.
Title: Re: Chain and Sprocket
Post by: scratch on June 08, 2006, 04:54:36 PM
If you keep the chain clean, too, 15k+.
Title: Re: Chain and Sprocket
Post by: Scorpio65 on June 08, 2006, 05:03:25 PM
Thanks Scratch, i'm at around 14,400 miles and its gone. I just put it on at the end of December, but with the miles i ride i guess thats about right.
Thanks again.. :cheers:
Title: Re: Chain and Sprocket
Post by: scratch on June 08, 2006, 05:09:27 PM
Sure!

My last chain was sorely neglected, wasn't cleaned very often, and I used Liquid Wrench to clean and sometimes lube it (most of the time I lubed it with the Maxim chain wax), which is really bad for the chain BTW; it barely lasted 14,500 miles.

At least I have learned to not use Liquid Wrench to clean or lube my chain.  I will be using Triflow and kerosene from now on to clean, and am currently experimenting (so far, favorably) with Duomonde o-ring conditioner and chain lube.
Title: Re: Chain and Sprocket
Post by: Scorpio65 on June 08, 2006, 05:19:08 PM
I've been using PJ1 Black Label. Do you know of anything better?
Title: Re: Chain and Sprocket
Post by: scratch on June 09, 2006, 09:48:26 AM
Nope.  As long as you're using something.  There aren't a whole lot of bad lubes out there.  Bad lubes don't sell very well.
Title: Re: Chain and Sprocket
Post by: hmmmnz on June 09, 2006, 10:08:15 AM
im on 30k miles and still on orignal chain, it snapped once at the link but still sweet
Title: Re: Chain and Sprocket
Post by: ballyhoo on June 09, 2006, 10:41:41 AM
You can check a chain for wear by trying to lift it away from the rear sprocket at about 3 o'clock. If it pulls away easily, you have a worn chain. Otherwise, use the distance between 20 pins as described in the manual.