Print Page - fork spacers (home made)

Title: fork spacers (home made)
Post by: KYGS500E on July 02, 2006, 01:06:22 PM

Hey guys... I'm trying to find a good how to on fork spacers.... can someone point me to one.... pantablo's is down... or gone or something.

P.S. Can you use them with stock springs?

Title: Re: fork spacers (home made)
Post by: KYGS500E on July 02, 2006, 01:08:47 PM

OK.... still not sure if its cool to use this on stock springs... but i foudn the how to... i'm retarded.... its on the main page.... couldn't remember where i found it before

Title: Re: fork spacers (home made)
Post by: hmmmnz on July 02, 2006, 02:36:17 PM

yep stock springs are what you would normally do it on, heavier for oil is a must as well, go up to a 15 or 20w or that makes a huge difference :thumb:

Title: Re: fork spacers (home made)
Post by: CirclesCenter on July 02, 2006, 07:45:15 PM

Bite the bullet and go with stiffer springs, I think sonic springs for the GS are like 80 bucks.

Trust me, they change your world.

Title: Re: fork spacers (home made)
Post by: average on July 02, 2006, 10:09:20 PM

Quote from: CirclesCenter on July 02, 2006, 07:45:15 PM
Bite the bullet and go with stiffer springs, I think sonic springs for the GS are like 80 bucks.

Trust me, they change your world.

Yep; my next step :thumb:

Title: Re: fork spacers (home made)
Post by: scratch on July 03, 2006, 03:06:35 PM

http://gstwins.com/gsboard/index.php?topic=25243.msg261220#msg261220
http://gstwins.com/gsboard/index.php?topic=21664.msg209561#msg209561
www.peterverdonedesigns.com/introduction.htm

GStwin.com GS500 Message Forum

Main Area => General GS500 Discussion => Topic started by: KYGS500E on July 02, 2006, 01:06:22 PM