Text only | Text with Images

GStwin.com GS500 Message Forum

Main Area => General GS500 Discussion => Topic started by: Altephor on July 04, 2006, 02:22:54 PM

Title: How easy is it to replace the stock front signals?
Post by: Altephor on July 04, 2006, 02:22:54 PM
And what are my options if I replace them?  The owner before me dropped the bike so the right turn signal is loose.. which I don't care for.
Title: Re: How easy is it to replace the stock front signals?
Post by: werase643 on July 04, 2006, 02:41:59 PM
stock
stock from a different bike
aftermarket

20 min
a little quicker of ya have an F
Title: Re: How easy is it to replace the stock front signals?
Post by: Altephor on July 04, 2006, 03:07:31 PM
I do have an F.. hmm maybe I'll have to look into this.. there's no flush mounts for the GS, is there?
Title: Re: How easy is it to replace the stock front signals?
Post by: Yankee Punker on July 04, 2006, 05:05:21 PM
  There are, look here- www.exoticsportbike.com. But most of the front flush mounts I've actually seen are hardly visible to most other drivers, you would almost be better just doing arm signals !!!
Text only | Text with Images