GStwin.com GS500 Message Forum

Main Area => General GS500 Discussion => Topic started by: deathlucky on July 10, 2006, 02:54:16 AM

Title: checking the oil do u screw the dip in or not
Post by: deathlucky on July 10, 2006, 02:54:16 AM
i know what you are thinking omfg how cant he know that omfg

i know you put it on the center stand (1 point for me)

so do u screw the dip stick in or do u sit it on top to check your oil level i have herd pplz say both
Title: Re: checking the oil do u screw the dip in or not
Post by: CirclesCenter on July 10, 2006, 02:59:36 AM
Yes, take it out, wipe it, screw it in and then remove it to check.

You check your oil, better than some of us here at GStwins...

Good lord I sound very snyde there don't I, oh well lack of sleep makes me grouchy, all apologies.
Title: Re: checking the oil do u screw the dip in or not
Post by: TadMC on July 10, 2006, 03:03:52 AM
IT WAS ON THE CENTER STAND DAMNIT,    YALL ARE DRIVING ME TO TEARS
Title: Re: checking the oil do u screw the dip in or not
Post by: deathlucky on July 10, 2006, 03:04:35 AM
thank you the stealship said you dont do that you just sit it on top (wont go back there)
Title: Re: checking the oil do u screw the dip in or not
Post by: bbq on July 10, 2006, 03:54:51 AM
Quote from: deathlucky on July 10, 2006, 03:04:35 AM
thank you the stealship said you dont do that you just sit it on top (wont go back there)

Yes, that's what stated in my manual as well. Bike in upright position without center stand and don't screw the dip stick in, which seem to go against the general suggestion around here.

Title: Re: checking the oil do u screw the dip in or not
Post by: CirclesCenter on July 10, 2006, 03:56:35 AM
Tad, I think it will be written on your will somewhere...

'It was on the damn centerstand!"

Dude I can't promise, but I'll try to keep the refs to that down.... No promises though.

Eh, I think the 1/8" difference either way is not a huge deal.

My manual said to screw it in, every car I've worked on said to screw it in, other suzukis say to screw it in. i say screw it in.

But really 1/8" will not make that much diff.
Title: Re: checking the oil do u screw the dip in or not
Post by: Cal Price on July 10, 2006, 03:57:23 AM
You don't screw in the diprod, it just sits on the top of the thread. My handbook (03) says quite catagorically DO NOT use the centrestand. It says "1)Hold the motorcycle vertically without centre stand. 2) The oil filler cap threads are NOT in but touching the filler hole upper edge"

You will find that holding the bike without using the stand can be tricky on your own so a lot of us do use the centre stand. My Yamaha has an oil "window" and you have to squat down to see it balancing the bike by one bar-end, awkward but you can do it with practice. It you are unsure but want a 100% acurate read, get a buddy to hold the bike whilst you take the reading. (or sit on it)
Title: Re: checking the oil do u screw the dip in or not
Post by: TadMC on July 10, 2006, 03:59:51 AM
Thanks Cal,  your like a English form of Kerry
Title: Re: checking the oil do u screw the dip in or not
Post by: CirclesCenter on July 10, 2006, 04:15:43 AM
Rule #1 of forums.

Someone will always contradict you.

Whether you are right, wrong or indifferent it is besides the point. In the world of forums, EVERYONE is wrong.

Sweet. I still think the 1/8" difference is fairly inconsequential.
Title: Re: checking the oil do u screw the dip in or not
Post by: TadMC on July 10, 2006, 04:19:21 AM
Cry me a river
Title: Re: checking the oil do u screw the dip in or not
Post by: CirclesCenter on July 10, 2006, 04:23:46 AM
Then will you build me a bridge? Then we can both get the f%$k over it?
Title: Re: checking the oil do u screw the dip in or not
Post by: TadMC on July 10, 2006, 04:28:49 AM
ehhh, thats pretty funny
Title: Re: checking the oil do u screw the dip in or not
Post by: MarkusN on July 10, 2006, 05:30:02 AM
Quote from: CirclesCenter on July 10, 2006, 04:15:43 AMSweet. I still think the 1/8" difference is fairly inconsequential.
It's more like 1/4". Which is about half the distance from L to F.

Not that it really matters; there's plenty of safety margin there.
Title: Re: checking the oil do u screw the dip in or not
Post by: Cal Price on July 10, 2006, 03:31:49 PM
Hey guys, I just quoted the handbook. I don't think the difference is critical but perhaps some people do................
Title: Re: checking the oil do u screw the dip in or not
Post by: Chris2P on July 10, 2006, 03:48:07 PM
Cal,  I checked my owners manual on my 1990 gs and it says to put it on the centerstand.  I wonder what caused the change in the instructions over the different model years?  Interesting.


Chris
Title: Re: checking the oil do u screw the dip in or not
Post by: RVertigo on July 10, 2006, 03:59:32 PM
Drop in, not screw in.
Title: Re: checking the oil do u screw the dip in or not
Post by: CirclesCenter on July 10, 2006, 04:05:33 PM
:P

I don't care.

Look how bad my feelings are hurt, the pain the agony, the thousand slings and arrows flesh is hier to!
Title: Re: checking the oil do u screw the dip in or not
Post by: Wrecent_Wryder on July 10, 2006, 05:31:22 PM
h7