Print Page - Will this pingel work for my 93?

Title: Will this pingel work for my 93?
Post by: spectroff on April 24, 2007, 06:29:30 AM

Heres the desciption:
Used Pingel petcock to fit Japanese bikes. Excellent condition, the mounting bracket holes are 44mm center to center, the fuel line size is 5/8" and the lever moves freely, but there is a cut in the wire mesh filter screen.
Thanks for any info.

Title: Re: Will this pingel work for my 93?
Post by: dgyver on April 24, 2007, 09:47:17 AM

Not sure about the bolt spacing...but...the fuel line size for the GS is 7mm. Typically 1/4" (6.4mm) and 5/16" (7.9mm) are used. A 5/8" line would be hugh.

Title: Re: Will this pingel work for my 93?
Post by: spectroff on April 25, 2007, 12:31:59 PM

thanks.

GStwin.com GS500 Message Forum

Main Area => General GS500 Discussion => Topic started by: spectroff on April 24, 2007, 06:29:30 AM