hi would these fit a 2000 GS500E?
http://www.1tail.com/sa/p/Woodcraft_37mm_Clip-ons.htm
Yes they will. Try e-bay There is a store there that has 37mm clipons for 99.00 buy it now. I bought a set the other day should be in tomorrow
:thumb:
thanks my only concern is the headlight, where would i mount it on the forks?
I've got a set of clip ons off of an old CBR600 with 37mm forks. I'm selling my bike this weekend and if the buyers don't want them, I'll sell them to somebody on the board for a reasonable ammount. Check the for sale section next week.
As for how to mount the headlight, you could remove your top plate from your top tripple and then you'd only need to slide your forks up about 1/2" to mount the clip ons above the tripple.
Or if you want to mount them below the tripple, you can buy some simple and cheap universal headlight brackets.
thanks wouldnt the bike be to low if i brought the forks up?
1996 gs , i got the clip ons :P . i wanted 2 get renthals , , then i relised how much more i loved the look and angle of the stock bars
do u have pics
Quotethanks wouldnt the bike be to low if i brought the forks up?
Maybee if you don't remove the top plate, but if you remove the top plate off of the tripple, you'd only need to slide the fork up about 1/2" and that should be fine. Of course you'd need to figure out another way to mount your gauges which would be harder than the head light. I don't know why I can't find them on ebay, but usually you can find a simple universal headlight brackett. You could do a search for Bent Bike in Lynwood and call them up. They have bracketts for $10 or so and they ship
here are some cheap headlight brackets
http://www.jcwhitney.com/autoparts/Product/tf-Browse/s-10101/Pr-p_Product.CATENTRY_ID:2003822/p-2003822/N-111+10211+600014812/c-10111
thanks, that doesnt sound to bad. i think theres a bike yard in town and the guy has a whole land full of of crashed and old bikes i can probably find something there.