Original thread is here http://gstwins.com/gsboard/index.php?topic=33449.0 pictures of many of the parts there as well.
What is left...
Racebike Frame, no title I will let it go cheap, cheaper still if you come get it. Disclaimer.. I have to take the motor out of it so this is not a "send it tomorrow" kinda thing/
Motor...
Front fender from a 2004
Carbs.. although I think these may be sold (who was asking for em?)
D&D Exhaust Full system
Race Tach
swingarm
Rear brake master
Used chain...and assorted bits and pieces. Ask me and I will look.
What I DO NOT have
Rims
rotors
tires
front forks/triples/brakes
I need to make room in the garage, let me know what you want and how quickly you want it and I will see what I can do
in what condition is the motor??
Quote from: gs500zach on May 23, 2007, 01:12:05 PM
in what condition is the motor??
used. :icon_twisted:
What kind of tach is the "Race Tach" as in is it a mechincal or electric tach?
Front Master Cylinder left?
PM sent concerning exhaust and bits.
Interested in the exhaust if previous person doesnt follow through, thanks
Quote from: oppy00 on May 23, 2007, 02:30:35 PM
PM sent concerning exhaust and bits.
Hey! i PMed him first!! :D Just the exhaust though. Its mine! all mine!!! :icon_lol:
is it the stock swingarm...modified....or other?
Do you have the two black rails that mount to the rear subframe, that also hold the taillight on?
i need if you have them the intake boots, im bidding on some now but they end in 4 hours
i gotta get my new project running before i put much money in it,,,
also need a front brake lever, (the whole assemblie if possible...)
Quote from: gs500zach on May 23, 2007, 01:12:05 PM
in what condition is the motor??
The Motor is a used race engine. Ran last race season.
Quote from: coll0412 on May 23, 2007, 01:44:19 PM
What kind of tach is the "Race Tach" as in is it a mechincal or electric tach?
Front Master Cylinder left?
I have a front Master cylinder and the "Race tach" is just the stock tach in a custom mount.
Quote from: NiceGuysFinishLast on May 26, 2007, 12:21:32 AM
Do you have the two black rails that mount to the rear subframe, that also hold the taillight on?
Not sure what you need? Got a pic?
Quote from: amcline on May 26, 2007, 02:14:36 PM
i need if you have them the intake boots, im bidding on some now but they end in 4 hours
i gotta get my new project running before i put much money in it,,,
also need a front brake lever, (the whole assemblie if possible...)
I have a K&N filter, no intake boots. I have a front brake lever and master cylinder.
Ok I finally figured out how to turn the notification on so I should be able to keep up to date on this thread.
EVERYTHING MUST GO! CHEAP! NO REASONABLE OFFER REFUSED!
interested in carb, motor and any fuel items, hoses, petcock, etc
wondering if you have the left handlebar contols
Still got the race tach?
NGFL you bastage, I have multiple time about the "race tach" and not heard anything. ohh well
Yes I have the Tach. First one witha reasonable offer gets it.
Quote from: frankieG on June 29, 2007, 08:52:54 AM
interested in carb, motor and any fuel items, hoses, petcock, etc
Carb is sold. Motor $500, I have a furel tank...?
If you don't here from me on here email me direct at
ducatiboy at hotmail dot com
sent ya an e-mail boot tha motor
Paypal sent for K&N filter....Thank's Dude.. :thumb: Address in your email.. :cheers:
Ya got a good clutch cable mine poped today >:(
Is the exhaust still available? What kind of condition is it in? Is it stainless steel?
The Exhaust is still here. It is a race system painted flat black.
Quote from: Crucialval on June 30, 2007, 07:39:12 PM
Ya got a good clutch cable mine poped today >:(
I have a cable, lever and perch.
how much shipped to 28779?
do you have any aftermarket cams or a worked head?
Quote from: Crucialval on July 02, 2007, 09:13:19 PM
how much shipped to 28779?
For the whole thing or just the cable?
Quote from: halfawake on July 02, 2007, 10:19:27 PM
do you have any aftermarket cams or a worked head?
I have Cams but I belive they are stock. The aftermarket cams are most likely in the motor. And the motor has slightly worked heads.
pm sent on Front fender from a 2004
Quote from: Crucialval on July 03, 2007, 05:47:33 AM
Quote from: ducatiboy on July 03, 2007, 04:02:48 AM
Quote from: Crucialval on July 02, 2007, 09:13:19 PM
how much shipped to 28779?
For the whole thing or just the cable?
All I need is the cable! Thanks
Bike Bandit, New cable $18.00 plus shipping
My Used Cable $10 shipped.
do you have rearsets????????
Not other than the stockers. :dunno_white:
Ducatiboy...Has the K&N filter gone out yet? I've been out of town and didn't know if you had shipped it yet. Thank's Steve
All parts go out tomorrow. :thumb:
Thank's Dude....... :cheers: By the way I saw some really mean street sport bikes in Myrtle Beach over the 4th.Also saw a number pulled over too..... :icon_mrgreen:
K&N and Tach mailed today