While I was out of town last weekend my bike leak a full 4 gallons on the floor of my garage. :mad:
A while back, my bike leaked in the garage at work after the plastic fuel filter cracked. So, I replaced all the lines with 5/16 hose, new hose clamps, and a new fuel petcock off a CR450 eliminating the vacuum hose. After all that, it leaked again.
This time it came out between the hoses and the tank petcock.
Should I order Suzuki 7mm hoses?
Should I just put tighter hose clamps on?
Also, my garage wreaks of gas. Any ideas to clean that up?
:dunno_white:
Thanks in advance.
What kind of 5/16" fuel line did you use? Was it the black rubber thick walled stuff from auto parts stores?
Quote from: dgyver on May 23, 2007, 07:45:35 PM
What kind of 5/16" fuel line did you use? Was it the black rubber thick walled stuff from auto parts stores?
Exactly.
I know some have used that type without problems. My thought is that it is too stiff to be able to compress enough to make a good seal.
I have used thin walled 5/16 poly fuel line for years without any problems.
Ebay search for tygon fuel line. 3 years after I got it it still is pliant.
Cool.
Srinath.
Yea, I used 1/4" Tygon stuff. It works great.