i just recive today my blinkers they are led and had 21 bulbs inside each one. I install'm and when the bike is in 1.5 rpm the blinkers stop blinking thay just get still and when I hit the gas start blinking more gas more quick they blink. What you think ?
damm it if I try to do that on a bike I never could get it !
http://gstwins.com/gsboard/index.php?topic=24294.0
Hope this helps. :thumb:
man that is confusing me I am not as good in english but you can help me with few words! did y need take it off or can I use a the frame as ground an connect every single lamp on different ground?
You need to get a digital variable load flasher relay.
for my Led Rear light , with Indicators , i was given resistors to manage the flash rate to get it to MOT standerds
They should have sent you a resistor ... my integrated brake/turn signal did , but as i have cat's eyes up front with regular bulbs they just flash a little faster
Blinker fluid is low, refill the reservoir.
Nate :nono:
Why didnt i think of that :thumb:
Quote from: DaxFX on July 09, 2007, 03:46:24 PM
i just recive today my blinkers they are led and had 21 bulbs inside each one. I install'm and when the bike is in 1.5 rpm the blinkers stop blinking thay just get still and when I hit the gas start blinking more gas more quick they blink. What you think ?
damm it if I try to do that on a bike I never could get it !
A constant-speed (electronic) flasher unit will be your very good friend. Go to an auto parts shop and get one -- from the wiring diagram, it looks like you need a 3-wire unit.
http://www.bikepower.net/gs500e-power/thebike/wiring-diagrams/US%2BCA-1990.gif
D is positive feed, B/W is earth connection, Sb is feed to turn signal switch/lights.
-b.
my blinkers are not integrated they are cateye led and the tailligth have not arrive yet. hope i get it soon ! I prefer seperate blinkers from the main tailligy is more safety so I hop when I recive the tailligth works fine but the blinkers they just stay still I have to acelerate very hard the moto and they start blinking !! I need change relay ? I need ad something ? how I can get the lblinkers works correctly ? the bike looks super cool with those tiny cateye signals and i dont want to take it off !!
Quote from: DaxFX on July 09, 2007, 03:56:30 PM
man that is confusing me I am not as good in english but you can help me with few words! did y need take it off or can I use a the frame as ground an connect every single lamp on different ground?
Makes you wish you paid attention in school now, doesn't it?
Quote from: Egaeus on July 09, 2007, 11:45:15 PM
Quote from: DaxFX on July 09, 2007, 03:56:30 PM
man that is confusing me I am not as good in english but you can help me with few words! did y need take it off or can I use a the frame as ground an connect every single lamp on different ground?
Makes you wish you paid attention in school now, doesn't it?
you bet that
i have read that I need resistors ! ore something like that! where I Have to put'em? how many I need? any spacifications or size ??
(http://i117.photobucket.com/albums/o54/DaxFx/motora/Photo0021.jpg)
(http://i117.photobucket.com/albums/o54/DaxFx/motora/Photo0020.jpg)
(http://i117.photobucket.com/albums/o54/DaxFx/motora/Photo0019.jpg)
(http://i117.photobucket.com/albums/o54/DaxFx/motora/Photo0018.jpg)
hey I found on ebay some kits to correct the problems for the led turn signals !! some1 can tell me if this going to work !!
1- http://cgi.ebay.com/ebaymotors/2-LOAD-RESISTOR-BLINKER-FIX-LED-TURN-SIGNAL-7440-1156_W0QQcmdZViewItemQQcategoryZ33713QQihZ018QQitemZ280131671942QQrdZ1QQsspagenameZWDVW
2- http://cgi.ebay.com/ebaymotors/2-LED-TURN-SIGNAL-BLINKER-LOAD-RESISTORS-7443-3157-1157_W0QQcmdZViewItemQQcategoryZ33713QQihZ018QQitemZ280132050695QQrdZ1QQsspagenameZWDVW
3- http://cgi.ebay.com/ebaymotors/LOAD-RESISTOR-KIT-LED-TURN-SIGNAL-BLINKER-FIX-1156-168_W0QQcmdZViewItemQQcategoryZ33713QQihZ010QQitemZ200127930297QQrdZ1QQsspagenameZWDVW
please let me know if I can solve my problem with this ?
Quote from: DaxFX on July 11, 2007, 07:29:25 AM
hey I found on ebay some kits to correct the problems for the led turn signals !! some1 can tell me if this going to work !!
Sheesh, they're selling ceramic resistors that should be available for $1 from an electronic supply house for $5 each. Nice tidy profit margin for them. Get a constant speed (aka variable-load) flasher relay from an auto parts store. Follow the electrical diagram that I posted before to install it. You shouldn't pay more than $5 for this!
-b.
i need only to change tho relay? sorry for asking so much but how i wll know wich cable goes with !
Quote from: DaxFX on July 11, 2007, 08:37:37 AM
i need only to change tho relay? sorry for asking so much but how i wll know wich cable goes with !
Refer to the electrical diagram in my earlier post. Terminals on the flasher should be labelled -- one should go to + voltage, the other to ground, the 3rd to the signal switch. There may be a diagram on the back of the box containing the flasher.
-b.
thanks very much !