I have the following parts available:
2 #40 pilot jets. Non-bleeding, brand new.
2 #37.5 stock pilot jets. Used.
2 #135 main jets. New.
2 #140 main jets. One has a ding in the side.
1 #150 main jet. New.
2 Dynojet needles. Off a bike with less than 5k miles, so unlikely to be worn.
1 stock needle.
Misc carb parts. 2 needle seats, float bowl, slide spring.
PM me if you need any of this stuff.
How old are the needle seats? I'm assuming these are the round tubes with the o-rings? that hold the needle valve?
Quote from: Slater1601 on July 14, 2007, 06:50:32 AM
How old are the needle seats? I'm assuming these are the round tubes with the o-rings? that hold the needle valve?
4.5k miles when I replaced them. I did a complete carb rebuild and new seats came with the kit. The carbs turned out not to actually need a rebuild (the problem was a bad install of a Dynojet kit).
-b.
PM sent for some jets.