Parting out 1989 Suzuki GS500E ALL PRICES ARE OR BEST OFFER. EMAIL FOR PICS
Ok here's the deal , I am going to get a new bike and this thing needs to go. So I will lower all prices , so come and get it.
The bike works great and has been raced here is alist of parts & prices
all parts would be great for racers. Cause we all need all the spares we can get.
everything is price + shipping or best offer + shipping.
ALL PARTS IN GOOD CONDITION OR BETTER UNLESS NOTED.
front & rear wheels with michelin pilot powers on them one TD on tires $ 300.00 NEW PRICE $150 + shipping . tires r worth more then that.
front & rear axles $30.00 NEW PRICE How about they go with wheels.
airbox $30.00 NOW $ 10
carbs with factory pro jet kit installed $160 NOW $ 50 SOLD
throttle & clutch cables $10
front fender $40 (black) NOW $ 30
rear brake caliper with arm & perch, rear master cylinder, rear brake reservoir NOW ALL TOGETHER $ 60
stock coils and wires $30 NOW $ 20
lower & upper triple tree with steering stem $150 NOW $80
(upper is 1989 gs stock with clipon style bars )
rectifier $40 NOW $ 25
CDI blackbox $140 NOW $75
wiring harness $70 NOW $ 50
engine 500cc all stock runs great (9937 miles on it) MAKE OFFER
frame clean title MAKE OFFER
swingarm $100 NOW $ 50
V&H full exhaust system (small hole in can. had to drill out screw to repack works great) $150
front forks $200 NOW $100 SOLD
woodcraft rearsets ( left peg scraped ) $150 NOW $ 75 SOLD
starter soleniod $30 NOW $ 10
Send email to whisky402@yahoo.com
thanks :thumb:
does it have the clip ons? if so can i get just the clip ons?
They are attached to the upper tree.
(http://thumbp2.mail.mud.yahoo.com/tn?sid=1355156925&mid=ALizo0IAATGWRqVbCQHPh2XJJs0&partid=2&f=358&fid=Inbox)
I'll sell you clip ons for 100 and they are powdercoated black.
Cool.
Srinath.
Quote from: seshadri_srinath on July 23, 2007, 07:34:07 PM
I'll sell you clip ons for 100 and they are powdercoated black.
Cool.
Srinath.
that reminds me i need tubes srinath.....btw lets see if you get the same amount of shaZam! i did for posting similarly a while back
Woodcraft Rear sets , Dibs!!!!!
Quote from: seshadri_srinath on July 23, 2007, 07:34:07 PM
I'll sell you clip ons for 100 and they are powdercoated black.
Cool.
Srinath.
got any pics and 100 is alittle pricey i dont have a bunch of cash on me at the moment
How about just selling me the cush drive and sprocket from the rear wheel?
Quote from: tntmo on July 24, 2007, 08:57:41 AM
How about just selling me the cush drive and sprocket from the rear wheel?
I kind of wanted to sell the wheels as a set . you can buy the sprockets & chain.
thanks
Quote from: Jay_wolf on July 23, 2007, 07:50:35 PM
Woodcraft Rear sets , Dibs!!!!!
I second the woodcraft after Jay
Quote from: frankieG on July 23, 2007, 07:48:01 PM
Quote from: seshadri_srinath on July 23, 2007, 07:34:07 PM
I'll sell you clip ons for 100 and they are powdercoated black.
Cool.
Srinath.
that reminds me i need tubes srinath.....btw lets see if you get the same amount of shaZam! i did for posting similarly a while back
OK cool I'll send you ... BTW ... box for the wheels ... doesn't fit. I'm back to looking at boxes. Anyway tubes, yea, riding along with the wheels.
Now I doubt I'll get much crap, see ... this clown wants to sell sheite for trumped up $$$ ...
$600 for a frame ... yea right ...
Anyway, I'd prolly get mucho sheite for this than the actual clip on post.
Cool.
Srinath.
i got a frame and swingarm with Title off ebay for 99p ,
i couldnt pick it up , and he sed £70 to deliver ,so i told him to keep it and got possative feedback ,
600 bucks for a frame isnt a good price
Edit* was a 1998 Gs500 Frame
100-300 is what I've commonly seen em go for :dunno_white:
Well see, I was looking at shop that sells GS stuff and they were selling frames for $800 so I knocked $200 off. like it says at the top of my post prices are best offer.
Mach1 rearset sale pending I'll let u know.
seshadri _srinath, who in the hell are u calling a clown :flipoff: anyway if u want to sell something start your own post, somewhere else. :2guns:
Like I just sad make offers and we'll deal, I got just about ever part on a GS ( DON'T HAVE TAIL SECTION ) :cheers:
I'll take the tank if its available.
Quote from: EMF9 on July 25, 2007, 04:46:30 AM
I'll take the tank if its available.
I still have it send me an email and we'll go from there.
I wont be able to get back to you until I get off work around 4:30 est
thanks
whisky402@yahoo.com
Quote from: whisky on July 25, 2007, 06:17:19 AM
Quote from: EMF9 on July 25, 2007, 04:46:30 AM
I'll take the tank if its available.
I still have it send me an email and we'll go from there.
I wont be able to get back to you until I get off work around 4:30 est
thanks
whisky402@yahoo.com
Just emailed.
Quote from: EMF9 on July 25, 2007, 06:23:44 AM
Quote from: whisky on July 25, 2007, 06:17:19 AM
Quote from: EMF9 on July 25, 2007, 04:46:30 AM
I'll take the tank if its available.
I still have it send me an email and we'll go from there.
I wont be able to get back to you until I get off work around 4:30 est
thanks
whisky402@yahoo.com
Just emailed.
Check your e:mail
how about a deal for tail light, front brake assembly from bar on mc to caliper, gauges with mount and indicators, ignition with key, wire that goes to starter motor.
will send email when i get home if no response
Quote from: russomf on July 26, 2007, 01:35:37 AM
how about a deal for tail light, front brake assembly from bar on mc to caliper, gauges with mount and indicators, ignition with key, wire that goes to starter motor.
will send email when i get home if no response
Tail light front brake assembly ,turn indicators, ignition w/key & wire to starter I have.
Gauges are gone. email with offer.
thanks
EMF9 I sent you a PM
Here is a pic of what it looked like until I started selling parts.
(http://i13.tinypic.com/53k7kva.jpg)
What tail Plastics are they , if there race fairings ,or a solo seat . Dibs . and wat is it ?
Quote from: Jay_wolf on July 27, 2007, 02:52:46 PM
What tail Plastics are they , if there race fairings ,or a solo seat . Dibs . and wat is it ?
All body work is gone.
would you have a front brake line?
I get payed in 2 days ,how much is the total , is it 155 bucks? or call it a even 150? :thumb:
Voltage regulator?
Quote from: average on July 29, 2007, 11:07:01 PM
Voltage regulator?
I still have it email or pm me :thumb:
sent you an email with the updated list of stuff i need. ready to send cash once i find out if you have everything.
Quote from: russomf on July 30, 2007, 07:11:40 AM
sent you an email with the updated list of stuff i need. ready to send cash once i find out if you have everything.
Ican get back to you after I get off work around 4:30est :thumb:
here are some pics
(http://i11.tinypic.com/62p0vgi.jpg)
case covers have scratches but they don't leak.
(http://i10.tinypic.com/61yfggp.jpg)
hole is where one of the end cap screw is don't think it leaks
(http://i18.tinypic.com/6f6k7ld.jpg)
(http://i10.tinypic.com/4z1y360.jpg)
rims & pilot powers, swingarm, forks & you can see front rotor I have the rear one aswell
(http://i11.tinypic.com/4uudls1.jpg)
top tree & stuff
(http://i15.tinypic.com/6btkcj8.jpg)
(http://i16.tinypic.com/6c3iq1d.jpg)
filters small hole :dunno_white:
(http://i11.tinypic.com/4pbutj8.jpg)
(http://i14.tinypic.com/4u07vw2.jpg)
(http://i17.tinypic.com/4pjta8l.jpg)
some stuff
(http://i18.tinypic.com/4ravfja.jpg)
belly pan
So what is going on with the woodcraft rearsets?
Due to personal problems , i cant afford them at the moment , and i dont want to hold anyone up , so i believe u was the next dibs , at least shipping for you wont be 55 bucks lol :thumb:
K&N FILTERS SOLD
Mach1 I sent u an email
I just fixed the list and marked what was sold. :icon_mrgreen:
I still have alot of good stuff left. :thumb:
make offer.
Thanks
how about $75 for total rear brake and wheel assembly? you can keep the tire, I want the rim, cush drive, rotor, caliper, line, master cyl, axle and whatever other brake stuff is required...
Quote from: DCopp on August 22, 2007, 03:08:03 PM
how about $75 for total rear brake and wheel assembly? you can keep the tire, I want the rim, cush drive, rotor, caliper, line, master cyl, axle and whatever other brake stuff is required...
I can sell you the rear caliper with arm and perch, line, master, axle, and rotor for $100 + shipping.
I will only sell the rims with tires as a set.
Thanks
:icon_razz: :icon_rolleyes: :icon_confused:
Bump for new price. :thumb:
do you have a gauge cluster or just a speedo?
Quote from: tripleb on September 08, 2007, 09:28:23 PM
do you have a gauge cluster or just a speedo?
Sorry their gone.
I'm still interested in a motor
Still have that black piece that goes above the brake light that says "Suzuki"? Would love to take that off your hands, pm me or email tyguychang@gmail.com.
do you still have the set of forks ?? are they straight ??
how much ?
Quote from: latinrider07 on September 29, 2007, 10:55:23 AM
do you still have the set of forks ?? are they straight ??
how much ?
Sorry forks are gone.
forks are gone. still have alot of stuff :thumb:
Carbs, forks & rearsets SOLD
wiring harness is sold.
Best price on the frame shipped to zip 60634, reasonable price please.
How much for the belly pan shipped to 55414
Quote from: coll0412 on December 18, 2007, 09:04:06 AM
How much for the belly pan shipped to 55414
Sorry it's sold.
Do you still have signals, wheels/tires, and engine ? If so, list prices please. Shipping to 33510. Please PM when you post the reply. Thanks
Quote from: ohgood on December 18, 2007, 06:16:47 PM
Do you still have signals, wheels/tires, and engine ? If so, list prices please. Shipping to 33510. Please PM when you post the reply. Thanks
I don't have the signals but still have wheels/ tires & engine. PM SENT