Where could i get hold of a inner spacer . as i bought the new bearings for the B6 wheel . and i didnt even think id have 2 change the inner spacer .its being done by a friend at a MOt place .could they take the old one outta my Gs500 wheel and use it , or just buy a new one
Thanks Alot every one !
Jay
Quote from: Jay_wolf on August 08, 2007, 12:10:10 PM
Where could i get hold of a inner spacer . as i bought the new bearings for the B6 wheel . and i didnt even think id have 2 change the inner spacer .its being done by a friend at a MOt place .could they take the old one outta my Gs500 wheel and use it , or just buy a new one
Thanks Alot every one !
Jay
Use the one from the GS wheel.
i have a 1990 Gsx Kat rear wheel .,its a 3.5 etc , im sure its a match for the Gs wheel , as it can be used . can i take the spacer out of that one ?
Thanks
Page Dgyver. He's made more GS/Kat mods than anyone I know.
Werase is also a great resource for this kind of question.
ill hope he reads this lol
If the inside distance between the 2 bearings is exactly the same on the Kat wheel as the GS wheel the GS spacer will do, if not you need the Kat one. Use the wrong size and the bearing races will preload against each other when you nip everything up and quickly fail. Personally I would go with the Kat one as its guaranteed to be the correct length.
So the Gs500 wheels and the Kat 1990 wheel are the same ,as they look indentical to me ,and i just need one of them for the b6 wheel . the kat wheel is off the bike ,my gs wheel is still on, so id much prefer to use the kat one , but i just need to no for sure .
Thanks for your input guys
The B6 bearing spacing is wider than the GS. The only option that I know of is to have one made.
I thought they were the same and that was the reason for spacing the sprocket out.I guess I had better go fix mine.
So how did Hmmmz do his ? im confused , maybe the entry on the wiki needs updating
He may have used the B6 spacer. It will touch most of the inner race but I would not recommend using it.
Damn , bought that B6 wheel in good faith ,
Ill have to Pm him about it , i really wanted that bad boy on my bike , i dont want the 130 tire ,it sucks