Do the carburetors from a '06 gs 500F fit the '94 gs 500E without any problems? :icon_confused:
Yup, with a bonus. You'll get an improved 3-circuit carb.
The only issue is the 01+ carbs use a dual throttle cable setup. You could run it with your single cable, without the added safety of forcibly closing the throttle if it doesn't spring back by itself. (Which is the same situation you're in now.)
The 06 also has a throttle position sensor, which would do nothing for you. However, I'll bet if you got a signal generator/rotor and ECU from a 04+, it would probably do some kind of variable ignition advance, whatever that's good for. (Emissions crap or power. My guess is emissions crap.)
You may need to use the airboots (airbox-to-carb boots) from '01+ models.
Quote from: scratch on August 09, 2007, 10:33:36 AM
You may need to use the airboots (airbox-to-carb boots) from '01+ models.
I have the airbox+ boots from an '05
Don't have to. But it would be beneficial to snag the throttle controls from a similar year GS :thumb:
Quote from: spcterry on August 09, 2007, 05:19:53 PM
Don't have to. But it would be beneficial to snag the throttle controls from a similar year GS :thumb:
thanks ;)
Now, the reason why I asked about the carburetor swap is because I'm having problems with my bike. I have to clean the carburetors every 2 months! :2guns:
since I got the bike. And this has been the only thing that comes to mind to fix this problem once and for all.
I changed the fuel tank from a regular GSE to a California Model (wich is the one I own) does this has anything to do with my problem?
Problem: bike starts the first time everytime, but as soon as I give it gas it dies :dunno_white:
Please help!!
Ummm, i didn't know there was any difference in the fuel tank for the Cali model :dunno_white: did you check for rust??? in the tank????
Yes, and there was alittle, I drained the tank and put new gas.
Do you have the in tank petcock screen? Also did you add an inline fuel filter?
Ehhh, if you see rust you really need to clean and kreem it.........
Quote from: scottpA_GS on August 09, 2007, 05:46:23 PM
Do you have the in tank petcock screen? Also did you add an inline fuel filter?
I have the petcock screen in, and yes I had added a inline fuel fileter but I removed it. should I add one again?
Quote from: spcterry on August 09, 2007, 05:52:06 PM
Ehhh, if you see rust you really need to clean and kreem it.........
How do I do that? "kreem it"?
Quote from: Merkurio24 on August 09, 2007, 06:29:42 PM
Quote from: spcterry on August 09, 2007, 05:52:06 PM
Ehhh, if you see rust you really need to clean and kreem it.........
How do I do that? "kreem it"?
Try this http://cgi.stanford.edu/~sanjayd/gs500/Restoration/TankRust
And this to help with fuel starvation http://gstwins.com/gsboard/index.php?topic=36958.0