Hi everybody, up for sale is a whore of a track/race bike. I've had this bike for a year, and ran one track day on it. It starts and runs, but needs a little tweaking. The parts alone on this thing are worth it. It currently has stock head and carbs, but will include the over bore and Keihin carbs. TONS of spares, oil filters, brake pads, sprockets, gaskets, misc. parts.
Motor:
-2mm overbore
-hi-comp pistons
-custom Rich Omdahl head: extensive porting, combustion chamber work, Alum/silicon/bronze valve seats, shim under bucket conversion
-1mm oversize intake valves
-oversize cylinder head studs to allow for higher head bolt torque(less head gasket leaks)
-full race cams
-oversize Keihin CR special carbs w/ K&N pod filters
-counterbalancer still installed
-Yosh short baffle exhaust
-Dyna 2-stage rev limiter (hi-limit plus launch limit controlled with clutch lever)
Suspension:
-Fox rear shock w/ remote reservoir
-02 GSXR600 Front fork, revalved and re-sprung for 200#
-Double disc brakes up front w/ TL1000 master cylinder
Bodywork:
-Ducati 999 Upper and Lower
-GSXR front fender
-Carbon fiber TZ250 tail section w/ custom aluminum sub-frame
-Woodcraft rearsets
I am located in Minneapolis, MN. Best way to get ahold of me is raskwon1@yahoo.com
I will be checking this site often though. Pics to follow. . .
Bump with pics. . .
(http://i2.photobucket.com/albums/y27/fakehatch/RasDCTCGs5002.jpg)
(http://i2.photobucket.com/albums/y27/fakehatch/RASGS500DCTC.jpg)
Big thanks to Jonah at momentumphoto.net for the pictures!!!
dude, you must be a giant.. you look massive on that thing!
This is a sweet bike, I have ridden and the front suspension is very nice.
Bump for a sweet bike....ohh and did you throw a post on CL
Thanks Aaron. I still have your camo ratchet. :cookoo:
CL is next.
bump. 1,000.00 takes evrything. You could probably part it out and make a profit.
New bike is on the way, this has to go.
What kind of tweeking is required? Why the sale after one use?
Probably needs a new head gasket. I've always had fuel injected bikes, and was looking toi getting into racing, and the more I searched, and heard, these bikes need alot of maintence. I'm looking for a turn key and go.
When I got it, it ran like shaZam!, I went through the carbs and cleaned them, switched the stock head and carbs on, ran my track day, had a BLAST, but too nuch maintence, and GS500 aren't the most competitive UL bikes. Hence my getting a kawizx6r.
Somebody please buy this!
Any interest in parts? Am willing to part. . .
I might be interested in the suspension set-up. How much for the front end and the rear shock?
I am interested in the ysh.. got any pics?
Interested in engine and exhaust.
Mmm the vulchers circle....Fakehatch you know what I am interested in...
Ohh and those who are wondering this is a black can R&D yoshi...the better of the two yoshis if I remember correctly
Interested in the tank / lockset cap. Details on year and condition?
Quote from: scottpA_GS on September 07, 2007, 10:12:20 AM
I am interested in the ysh.. got any pics?
Yes two. I beleive this is a full system. It could use a polishing also. Some sligh rash from lean angle where bracket grabs can, can't really see in the pics.
(http://i2.photobucket.com/albums/y27/fakehatch/MVC-186F.jpg)
(http://i2.photobucket.com/albums/y27/fakehatch/gs500.jpg)
Quote from: PatrickInNC on September 07, 2007, 11:45:37 AM
Interested in engine and exhaust.
Check the exhaust pics, The engine will include the 1mm over bore, it WILL need a new head gasket, which would be included.
Quote from: Pedal Pusher on September 07, 2007, 09:11:23 PM
Interested in the tank / lockset cap. Details on year and condition?
Not a clue what year this tank is off. LOTS of surface scratches, and a small dent and scratches on left side. This tank would probably be meant to stay on a track bike. Lockset cap in great condition with seperate key
Quote from: fakehatch on September 08, 2007, 12:16:38 AM
(http://i2.photobucket.com/albums/y27/fakehatch/gs500.jpg)
Holy Crap you ARE a GIANT!!! :cheers: :cheers:
if the bike has a gauge cluster or just a speedo than I'm interested. PM me.
Quote from: tripleb on September 09, 2007, 07:05:53 AM
if the bike has a gauge cluster or just a speedo than I'm interested. PM me.
Nope, no cluster, just rev limiter.
How much for the fairings and tail. I am also interested in the gas cap if Pedal Pusher doesn't want it. Do you also have the ignition switch?
Very interested in the rear seat unit ,if boss doesnt want it :thumb:
email sent to boss.
Ok kids, I really didn't want to part this bike out, but here goes some pricing.
GSXR front end WITH wheel and brake set up,woodcraft clip-ons and all 450.00 OBO
rear fox shock 150.00 OBO
stock engine WITH 2mm overbore and new head gasket 125.00 OBO
tank SOLD
Yoshimura exhaust with headers 200.00 OBO
coll0 has dibs on the rearsets and rev limiter, PM sent.
still willing to take requests for parts. . .
Buyer will pay for ALL ACTUAL shipping costs. I'll supply the packaging
I want the tank and all fairings including tail
Fairings and tank are sold.
Rev limiter and rearsets are sold.
Anybody need a new suspension? Extra wheels? engine?
how about a quote on the front clip and the rear rim/tire/sprocket/rotor
clip-ons?? 60.00
rear tire/wheel/sprocket 70.00
Try again for engine. Let me know
So the engine you are selling, and the engine you have listed initially with all the mods are different from one another? Does the price of the engine still include oversize carbs?
Reason I ask, is engine in initial post has extensive modding, and the engine you have listed for $125 says STOCK motor. Unfortunately I'm on a super tight budget at the moment.
So to sum up:
I'm interested in:
engine
exhaust
carbs (keihen)
Fox shock
Quote from: fakehatch on September 11, 2007, 04:47:55 PM
clip-ons?? 60.00
rear tire/wheel/sprocket 70.00
Nope ment whole front end. Trees to rim/tire, rotors, brakes etc.
Patrick, PM sent
Ducati, send me an email. I have a price listed for the whole front end, and gave you the rear tire/rim/sprocket price.
Bump for a great seller. :thumb:
also interested in the front end, top to bottom shipped to 14225.
SOLD:
-rearsets
-rev limiter
-stock engine, stock carbs, throttle assembly
-tank
-bodywork
STILL AVAILABLE:
-2002 gsxr600 forks 100.00 each
-2002 gsxr600 triple, top and bottom 50.00
-fox shock, w/ remote resovoir 150.00
-yoshimura exhaust, full ( dent onthe backside of can, barely noticable.) 200.00
-43mm woodcraft clip-ons 60.00
-front rim (black) with dunlop race mounted, life left on tire 120/70R17 50.00
-rear wheel (white) with cush drive, 155/60R17 maybe a track day left 50.00
-front double disk set up with TL1000 master cylinder, SS lines 35.00
TONS OF SPROCKETS, SPARES, BOLTS, REAR BRAKES
Recieved the parts today. Everything is perfect. :thumb:
Thanks,
Boss275
Exhaust is sold.
One last bump before ebay.
Clip-ons, fo shock, front end still available. Along with a bunch of random parts.
no one has purchased the front end.....man that is soooooooo tempting
You might want to consider posting the GSX600 Fronts in a separate thread, and list it as a bolt on package(as it actually is) the upper and lower triple clamps, and twin break setup. Its an awesome mod, and for that price is a steal.
Let me know what spares you have hanging around as I might want to snag some of it.
How about a trade for some tire warmers for a front end....lol
Quote from: coll0412 on September 26, 2007, 09:05:08 PM
no one has purchased the front end.....man that is soooooooo tempting
You might want to consider posting the GSX600 Fronts in a separate thread, and list it as a bolt on package(as it actually is) the upper and lower triple clamps, and twin break setup. Its an awesome mod, and for that price is a steal.
Let me know what spares you have hanging around as I might want to snag some of it.
How about a trade for some tire warmers for a front end....lol
HAAA! Nice try!
I have Bin of extras, your more than welcome to come by and check it out. Brake pads, sprockets, just gobs of stuff. I'm off to Germany till Oct. 7th, but shoot me a PM on the MNSBR.
will do
totally off topic, but germany rules. i#m currently in cologne, and euro keyboards are the ghey. sorry for the grammar. free euro bump for myself as im spending way too much money. 3.20 us tall boy becks, munich and oktoberfest is next.
Spend spend spend, then when I offer $50 for your front end you will be in such desperate need of money you'll take it :flipoff:
do you still have these?
-oversize Keihin CR special carbs w/ K&N pod filters (know the size?)
-Fox rear shock
will you sell the TL1000 front master cylinder & resevoir separately?
dibs if you still got them.
i also need a clutch lever if you've got one (or two) lying around.
please let me know.
So I know this is an older thread.. but mumbling jumbling through all the replies and responses...
What's still available???
Quote from: l3uddha on October 10, 2007, 01:27:11 PM
do you still have these?
-oversize Keihin CR special carbs w/ K&N pod filters (know the size?)
-Fox rear shock
will you sell the TL1000 front master cylinder & resevoir separately?
dibs if you still got them.
yes, yes and yes.
Here is a copy and paste of what is still available:
-2002 gsxr600 forks 100.00 each
-2002 gsxr600 triple, top and bottom 50.00
-fox shock, w/ remote resovoir 150.00
-43mm woodcraft clip-ons 60.00
-front rim (black) with dunlop race mounted, life left on tire 120/70R17 50.00
-rear wheel (white) with cush drive, 155/60R17 maybe a track day left 50.00
-front double disk set up with TL1000 master cylinder, SS lines 35.00
TONS OF SPROCKETS, SPARES, BOLTS, REAR BRAKE SET UP
here are some pics
fox shock
(http://i2.photobucket.com/albums/y27/fakehatch/foxshock.jpg)
triple
(http://i2.photobucket.com/albums/y27/fakehatch/triplrtree.jpg)
front wheel
(http://i2.photobucket.com/albums/y27/fakehatch/frontwheel.jpg)
rear wheel
(http://i2.photobucket.com/albums/y27/fakehatch/DSC00188.jpg)
front brake set up
(http://i2.photobucket.com/albums/y27/fakehatch/DSC00184.jpg)
forks
(http://i2.photobucket.com/albums/y27/fakehatch/DSC00182.jpg)
Buy this stuff.