Print Page - Help, fender problems

Title: Help, fender problems
Post by: bruce297 on October 29, 2007, 07:50:18 AM

So I got out to get on my bike this morning and the fender under the tail section was sitting on my tire. After closer is looks like there are two bolts, one on either side. Both of these bolts are missing. Does anybody know what size they are? I'm not sure what size they are.

Title: Re: Help, fender problems
Post by: gsJack on October 29, 2007, 08:03:19 AM

Looks like there are 5 bolts. One in the front, 2 in the back, and 2 in the middle, if you mean the 2 in the back they seem to be 6x16 mm according to fiche:

http://www.ronayers.com/fiche/300_0284/rear_fender_model_y/rear_fender_model_y.cfm?man=su&groupid=3160&parent=3070

Title: Re: Help, fender problems
Post by: bruce297 on October 29, 2007, 08:27:08 AM

Ya the only bolt that i have out of those five is the one in the front. So now all i need is the size in the middle,

Title: Re: Help, fender problems
Post by: CndnMax on October 29, 2007, 01:06:51 PM

i've had to tighten the 2 back bolts twice, keep an eye on those/all bolts :thumb:

GStwin.com GS500 Message Forum

Main Area => General GS500 Discussion => Topic started by: bruce297 on October 29, 2007, 07:50:18 AM