I'm going to need good clutch and throttle side levers w/ parts and cables ect. Rear disc brake in good condition, possibly the front caliper but I'm not sure yet. Black timing case cover on right side. Seat latch w/ key.
There will be more but thats what I can think of off the top of my head.
:cheers:
I think I got both levers that you need but let me check and make sure they are straight and i'll let you know
cool??? :thumb:
Good deal. LMK
I know I have both the front and rear break setups. I have a complete rear, including lines and caliper, and several front calipers. Let me know if you want pics. Rylon rylonjerome@gmail.com
I've got a spare rear disc I bought but didn't need if you are interested. I paid $30 plus shipping here on the board for it.
Let me know if you'd like it.
Thanks,
Todd
I have a spare seat latch in very good condition, the cable that goes along with it. I don't have a lock. I just hid the cable, and pull to open the seat.
Thats is for day 2. Now I need to get the parts to get things going again.
1 frame mounted plastics 10mm bolt.
2 rear plastic center section screws.
1 fender reflector.
1 frame plastics rubber gromit.
1 choke return spring.
2 rear brake pins.
1 rear brake support arm with castle nut.
heel guard bolts for both sides.
Crank case vent tube filter gasket
Brake pads front and rear.
1 rear master cylinder reservoir screw.
Master cylinder rebuild kits front and rear.
Front axle castle nut.
2 front caliper mounting bolts.
2 brake caliper bleeding valve screws.
4 shims between 2.55 - 2.60
1 front batlax BT45 tire
Handlebars, clutch handle.
2 Purple Suzuki tank stickers.
1 black Suzuki case badge.
thats it for now.