Sooo. I'm apparently more of a stud than my wife gives me credit for becuase I broke one of the bolts off on the tach when installing. I wasn't turing it that tight! but it was obviously too much.
Can I replace the screw, or do I need to find a new tach?
thanks
Which screw are you referring to? Do you have a photo? Can you describe it's location?
Alternatively, look up the fische at bikebandit.com and give us a call number. Then we'll be able to offer better advice on what to do. :thumb:
it is just the screw that comes out the back of the tach and holds it in. There are 2, one on either side.
In this schematic: http://houseofmotorcycles.bikebandit.com/suzuki-motorcycle-gs500ek-1989-speedometer-tachometer/o/m6049sch235833
Its the item that the washer #8 and bolt #9 screw onto. Since there is no separate # I'm guessing I have to just buy a new tach.
If you want to replace it you need to buy a new tach. I tried transplanting a new one in (one I salvaged from a damaged tach) but it was impossible, without breaking the housing, to get the old stud out. I now ride around with only one side bolt in.
It's not that big of a deal. You can try rigging something up with epoxy, or glue. But it's not paramount to the function of the tach and one screw keeps it seated just fine.
gracias.