I am rebuilding a 92 gs500 and need a front wheel. I've been searching on ebay and the only time i finally find one for a reasonable price...i don't have the money! Any help would be appreciated. Thanks!
fyi... 89-97 Katana 600/750 use the same front and rear wheels as the GS.
Bandit 400 uses same front wheel as well.
I have a set of white '93 wheels in my storage unit. They did come off of a parts bike that was laid down in a ditch and I never checked the runout on them. I'll try to get them out of storage in the next week or so and check 'em. I'll give you a good deal on them if they're straight. Where are you located?
Quote from: octane on January 10, 2008, 08:34:59 AM
Bandit 400 uses same front wheel as well.
....
Careful. The Bandit 400 wheel I have did not have the rotor holes on the right side. I had to drill and tap them.
Quote from: dgyver on January 10, 2008, 10:01:40 AM
Quote from: octane on January 10, 2008, 08:34:59 AM
Bandit 400 uses same front wheel as well.
....
Careful. The Bandit 400 wheel I have did not have the rotor holes on the right side. I had to drill and tap them.
Good to know, thanks D! I apologize for the misinformation...I thought they were drilled on both sides under the bearing cap...
I have a set off a 91 with rotors white in color ready to rock.let me know if you still need them
I believe the rotor holes are drilled already, cos both the B4 and the GS use the Katana wheels. 2 disc wheel, you just remove the cap I believe.
Cool.
Srinath.
Quote from: seshadri_srinath on January 31, 2008, 05:02:17 PM
I believe the rotor holes are drilled already, cos both the B4 and the GS use the Katana wheels. 2 disc wheel, you just remove the cap I believe.
Cool.
Srinath.
Maybe you did not read my post that the B4 wheel I have did NOT have the holes on the right side.
Huh ... strange, the GS wheels I believe are drilled and tapped both sides, and a plastic cap is put on the other side ... or maybe only 89 and some early years before the GS became a separate production line.
Cool.
Srinath.