Text only | Text with Images

GStwin.com GS500 Message Forum

Main Area => For Sale / For Trade / Wanted / Hot Deals => Topic started by: jeremy_nash on February 07, 2008, 11:15:17 PM

Title: carb parts needed
Post by: jeremy_nash on February 07, 2008, 11:15:17 PM
i need a set of the plastic housing off the top of the carbs for my 94gs.
Title: Re: carb parts needed
Post by: The Buddha on February 08, 2008, 09:13:02 PM
This I am almost sure I have, how is $10 ??
I tey you fo sho tommory ...
Cool.
Srinath.
Title: Re: carb parts needed
Post by: jeremy_nash on February 12, 2008, 11:43:57 PM
don't need them now.  after looking at a parts explosion, I realized I didn't need those nipples on them after all, so I just hot-glued the inside of them............but thanks anyway
Title: Re: carb parts needed
Post by: The Buddha on February 13, 2008, 07:54:14 AM
OK clown ... hot glue there isn't the best idea ... I would rather use a little round O shaped inner tube bit if that vacuum spigot is broken.
Cool.
Srinath.
Title: Re: carb parts needed
Post by: jeremy_nash on February 13, 2008, 04:27:23 PM
I've got a piece of inner tube in place of the oring.  I just hot-glued it over the top to keep water from getting in it and freezing.
Title: Re: carb parts needed
Post by: p51mustang on March 02, 2008, 09:28:46 PM
 :icon_rolleyes: Hry Guys,

I'm needing Diphragms for a 1999 GS,
Mine have pin size holes,NAPA parts store said to Epoxy for Rubber, Just a thin coat over holes.
anyone tried this? I was thinging the Epoxy will make a vacuum delay on one carb-on the piston valve :dunno_white: Austin TX, [p51]
Title: Re: carb parts needed
Post by: ben2go on March 02, 2008, 09:35:45 PM
If someone here doesn't have them,Srinath should,try this guy.He had them for $20 each.Just message him on his Ebay site.I have made alot of purchases from him when I couldn't get parts here or locally.

http://stores.ebay.com/GEORGEFIXS-MOTORCYCLE-PARTS
Text only | Text with Images