I need to remove the front sprocket and I can't seem to figure out how to remove the cover with the cable going to it. Any ideas???
Should be as simple as removing 4 or 5 bolts around the cover and it should come off.I can't remember if the clutch cable has to be removed from the cover.It maybe stuck to the engine case.
Remove the shift lever first and then the 5 small bolts holding cover on. Should be 8 mm socket for cover bolts, 10 mm for shift lever pinch bolt. I never remove the clutch cable, the cover can just hang there on the cable while you change the sprocket.
Thanks for the help. The old sprocket didn't have the two holes the new one did but everything installed and worked fine.
Quote from: gsJack on February 29, 2008, 09:21:41 PM
Remove the shift lever first and then the 5 small bolts holding cover on. Should be 8 mm socket for cover bolts, 10 mm for shift lever pinch bolt. I never remove the clutch cable, the cover can just hang there on the cable while you change the sprocket.
Yea, I kinda sorta forgot about the shift lever.It's been almost a year since I been in there.Just relying on poor memory.