Text only | Text with Images

GStwin.com GS500 Message Forum

Main Area => General GS500 Discussion => Topic started by: miket on August 20, 2003, 12:19:01 AM

Title: new howto: replacing the chain the hard way.
Post by: miket on August 20, 2003, 12:19:01 AM
From the same producers that brought you Poor man rejetting pictorial (http://www.angelfire.com/mt2/mikesgs500/rejetting/) and DIY timing advance (http://www.angelfire.com/mt2/mikesgs500/timing.html), featuring the same celebrated cast of Oil change for dummies (http://www.angelfire.com/mt2/mikesgs500/Oilchange.html), even more exting then Ghetto Radar Detector Mount (http://www.angelfire.com/mt2/mikesgs500/radar), a new special feature from the Cheapskate Production is hitting your screens this summer:

Replacing the Chain the Hard Way (http://www.angelfire.com/mt2/mikesgs500/chain)
Title: new howto: replacing the chain the hard way.
Post by: scratch on August 20, 2003, 08:16:43 AM
Very good!
Title: new howto: replacing the chain the hard way.
Post by: pantablo on August 20, 2003, 08:42:45 AM
Subtitled:
How to replace your swingarm...
Title: new howto: replacing the chain the hard way.
Post by: miket on August 20, 2003, 09:12:36 AM
Well, to replace the swingarm you have to remove the shock too. It's at least two more bolts  :roll:
Title: new howto: replacing the chain the hard way.
Post by: scratch on August 20, 2003, 10:46:14 AM
How about "How to accidentally check your swingarm bearings".
Title: new howto: replacing the chain the hard way.
Post by: miket on August 20, 2003, 10:48:58 AM
Yeah, that sounds like the right one!  :cheers:
Text only | Text with Images