Just want to make sure I'm replacing the right o-rings. I lost 2 when I was doing my first clean.
I got the kit from partsnmore.
Looks like 6, 11, and 20 or 21 right?
(http://www.bikebandit.com/assets/schematics/Suzuki/SU0083_013.gif)
I am confused, what o-ring did you lose?
The most common that gets lost is 26.
Try www.mrcycles.com for parts fiche, they image quality is far superior to bike bandit.
Part 26 is the trouble child.They get lost frequently and sometimes end up down the carb.
Quote from: ben2go on March 16, 2008, 05:20:41 PM
Part 26 is the trouble child.They get lost frequently and sometimes end up down the carb.
+1 :thumb:
Quote from: coll0412 on March 16, 2008, 04:19:40 PM
I am confused, what o-ring did you lose?
The most common that gets lost is 26.
Try www.mrcycles.com for parts fiche, they image quality is far superior to bike bandit.
Nice info... their image quality IS far far superior to bike bandit and other sites. Thanks...
Still having problems getting it to run though. I'll search through the forums before I start asking more questions.
How many o rings per carb are there to replace on a 90' bike?? I have a Hanes manual and all I can say is "Very Disappointed" in the quality and I am glad that i picked it up second hand!!! I have only found 3 (one in the main jet assembly, one in the float assembly and one between the covers on the needle /plunger side), did I mis one?? Thanks in advance -- JIm :)
There's one on the plastic piece that the float hangs from and 1 tiny one on top under the plastic cover.
There are 5 orings per carburetor. They are the 2 mentioned plus one under the slide support, one betweein the main jet and the perforated tube (#30 in the diagram), and one in the idle/mixture jet ahead of the spring and washer.