Text only | Text with Images

GStwin.com GS500 Message Forum

Main Area => General GS500 Discussion => Topic started by: Batalia on March 19, 2008, 12:38:05 PM

Title: Rejetting air screw
Post by: Batalia on March 19, 2008, 12:38:05 PM
Do i need to touch the airscrews if I rejet the carbs?  Seems that they are already set and don't want to change the setting.

97 gs500
Title: Re: Rejetting air screw
Post by: ben2go on March 19, 2008, 05:34:24 PM
Need mo info.What is the reason for the rejet?Post the air filter and exhaust you are running.
Title: Re: Rejetting air screw
Post by: Batalia on March 19, 2008, 08:48:46 PM
Vance Hines slip on, and rejetting so I can have the k&n filter that removes the air box.  I have the 150, 40 and one washer setup on rejetting
Title: Re: Rejetting air screw
Post by: ben2go on March 19, 2008, 09:13:39 PM
I would try setting them at 2,2 and a half,and 3 turns out.Which ever gives you the best performance stick there.Your jetting should be spot on for the exhaust and K&N lunchbox.
Text only | Text with Images