Here is a picture of my 1998 GS500E my first motorcycle!
(http://img.photobucket.com/albums/v303/dudegetasony/th_DSC00270.jpg) (http://img.photobucket.com/albums/v303/dudegetasony/DSC00270.jpg)
(http://img.photobucket.com/albums/v303/dudegetasony/th_DSC00269.jpg) (http://img.photobucket.com/albums/v303/dudegetasony/DSC00269.jpg)
(http://img.photobucket.com/albums/v303/dudegetasony/th_DSC00268.jpg) (http://img.photobucket.com/albums/v303/dudegetasony/DSC00268.jpg)
(http://img.photobucket.com/albums/v303/dudegetasony/th_DSC00267.jpg) (http://img.photobucket.com/albums/v303/dudegetasony/DSC00267.jpg)
(http://img.photobucket.com/albums/v303/dudegetasony/th_DSC00266.jpg) (http://img.photobucket.com/albums/v303/dudegetasony/DSC00266.jpg)
i'm also wondering what the ideal idle of this bike should be for some reason mines dipping just a tad bit under 1000rpms
<object width="425" height="355"><param name="movie" value="http://www.youtube.com/v/rpUpIpKx--k&hl=en"></param><param name="wmode" value="transparent"></param><embed src="http://www.youtube.com/v/rpUpIpKx--k&hl=en" type="application/x-shockwave-flash" wmode="transparent" width="425" height="355"></embed></object>
WELCOME! :cheers:
Adjust your idle w/ the GIANT screw in the center of the carbs to 1200/1500 I keep it about 1300
awesome just fixed the idling :-D
now what about that llitte lever for the fuel reserve where do i put that at?
Quote from: Tang on April 02, 2008, 05:49:56 PM
awesome just fixed the idling :-D
now what about that llitte lever for the fuel reserve where do i put that at?
PRI to start and run to ride.Res to make it to a gas station if you run out of gas.
Take the Motorcycle Safety Course :thumb:
http://www.msf-usa.org/
Already took the beginniers course back in november.
i'm thinking about taking the intermidiate course but i'm not sure.
Quote from: ben2go on April 02, 2008, 05:57:32 PM
Quote from: Tang on April 02, 2008, 05:49:56 PM
awesome just fixed the idling :-D
now what about that llitte lever for the fuel reserve where do i put that at?
PRI to start and run to ride.Res to make it to a gas station if you run out of gas.
Just to clarify, if you are riding your GS regularly (at least once a week), you can set it on RUN and leave it all the time. Use PRI when starting if the carb float bowls are likely to be empty or low -- for example, if it has been 2-3 weeks since your last ride, or if you ran it out of gas and have just filled the tank.
PRI = completely open flow to carbs under all conditions
RUN = vacuum-operated petcock (flow when engine is running)
RES = vacuum-operated, but draws from a lower outlet in the tank to get the last bit of gas out to get you to a station after you have run out on the RUN setting
In addition, there is a well-known and well-documented problem with the petcock. Search fuel starvation on this forum and you'll find lots of info.
Awesome gonna get on that fuel starvation stuff right away!
Quote from: Tang on April 02, 2008, 08:18:17 PM
Awesome gonna get on that fuel starvation stuff right away!
http://gstwins.com/gsboard/index.php?topic=19363.0