I'm going to be replacing the fork seals on my kat forks soon and I need some kind of fork seal driver. I can't really afford to buy one... http://www.motionpro.com/motorcycle/tools/fork_seal_drivers/ (http://www.motionpro.com/motorcycle/tools/fork_seal_drivers/) ... I've heard you can use pvc to seat the seal. If so what diameter would the pipe need to be? Anybody ever use pvc? Or anything else for that matter?
Yea I use PVC all the time. Take the assembled leg to Homedepot. in the pvc section get the one that fits over the chrome leg but inside the seal's outer lip. I think 1 1/2 inch ... but dont count on my memory.
Cool.
Buddha.
Quote from: The Buddha on April 16, 2008, 07:51:01 AM
Yea I use PVC all the time. Take the assembled leg to Homedepot. in the pvc section get the one that fits over the chrome leg but inside the seal's outer lip. I think 1 1/2 inch ... but dont count on my memory.
Cool.
Buddha.
Cool, thanks buddha
Be sure its Schedule 40 1"1/2 :thumb:
Yea 40 or 80, all the other schedules are for other busses, you dont want to get on that schedule 200 bus. I think it goes to mexico via cuba and nicaragua.
Cool.
Buddha.
Quote from: scottpA_GS on April 16, 2008, 01:23:32 PM
Be sure its Schedule 40 1"1/2 :thumb:
Not sure what that means, but it'll probably make sense once I'm looking at it.
I get inch and a half, but schedule 40?
Its a secret code man, the spy agencies have their grip on the Home depots man, they are feeding us a bunch of lies man, you gotta play by their rules else you get shipped off to arkansas via argentina and alaska and you gotta take this 1951 bus from South america to do it ...
Cool.
Buddha.
Quote from: The Buddha on April 16, 2008, 02:15:44 PM
Its a secret code man, the spy agencies have their grip on the Home depots man, they are feeding us a bunch of lies man, you gotta play by their rules else you get shipped off to arkansas via argentina and alaska and you gotta take this 1951 bus from South america to do it ...
Cool.
Buddha.
Sounds interesting...
Could be fun :dunno_white:
Yea and their aint no alias chick to run a missin to home depot either. Well there is a guy by the name of Elias ... which was confused and made into TV show with chick called alias.
And yes the buddha is totally hiding from the alias chicks illegitimate love child and the schedule 40 pipe with the rimbaldi artifact that can be used to make this red liquid that can destroy the world and give you external life at the same time.
Cool.
Buddha.
OK, so the real question is, who the f%$k has hacked Srinaths account????
Quote from: The Buddha on April 16, 2008, 02:37:19 PM
Yea and their aint no alias chick to run a missin to home depot either. Well there is a guy by the name of Elias ... which was confused and made into TV show with chick called alias.
And yes the buddha is totally hiding from the alias chicks illegitimate love child and the schedule 40 pipe with the rimbaldi artifact that can be used to make this red liquid that can destroy the world and give you external life at the same time.
Cool.
Buddha.
How do you come up with this stuff!?!? :laugh:
He has admitted to putting on his bell-bottoms and smoking a bowl out of a nifty clear float bowl he found :cookoo:
Quote from: bucks1605 on April 16, 2008, 02:02:22 PM
Quote from: scottpA_GS on April 16, 2008, 01:23:32 PM
Be sure its Schedule 40 1"1/2 :thumb:
Not sure what that means, but it'll probably make sense once I'm looking at it.
I get inch and a half, but schedule 40?
It has to do with the pressure rating and its minimum wall thickness. 1-1/2" Nominal Sch 40 has a .145" wall and Sch 80 has a .200"
Quote from: dgyver on April 16, 2008, 07:48:31 PM
Quote from: bucks1605 on April 16, 2008, 02:02:22 PM
Quote from: scottpA_GS on April 16, 2008, 01:23:32 PM
Be sure its Schedule 40 1"1/2 :thumb:
Not sure what that means, but it'll probably make sense once I'm looking at it.
I get inch and a half, but schedule 40?
It has to do with the pressure rating and its minimum wall thickness. 1-1/2" Nominal Sch 40 has a .145" wall and Sch 80 has a .200"
And I was starting to believe buddha...
Thanks for the clarification, dgyver.