I have a full fairing set off an '06. It was damaged, but has been repaired and partially sanded. It just needs some light sanding and painting.
Asking 250 shipped for all 3 pieces. I will part out, just tell me which you want.
(http://i61.photobucket.com/albums/h67/ryan1376/Picture632.jpg)
(http://i61.photobucket.com/albums/h67/ryan1376/Picture633-2.jpg)
(http://i61.photobucket.com/albums/h67/ryan1376/Picture634.jpg)
(http://i61.photobucket.com/albums/h67/ryan1376/Picture635.jpg)
(http://i61.photobucket.com/albums/h67/ryan1376/Picture636.jpg)
(http://i61.photobucket.com/albums/h67/ryan1376/Picture637.jpg)
How much for just the side and brackets?
I don't have all the brackets. Some got really bent so I tossed them. 2 of them I am keeping because the hold the oil cooler lines.
I need a right hand side if you still have it available.
you dont need the brackets that "hold" the oil cooler lines caue they dont hold anything. I removed mine when I went naked with no issues 2k miles later. The bottom of the line are steel screwed into the block and the uppers are bolted to the oil coller which is bolted to the frame
"you dont need the brackets that "hold" the oil cooler lines caue they dont hold anything. I removed mine when I went naked with no issues 2k miles later. The bottom of the line are steel screwed into the block and the uppers are bolted to the oil coller which is bolted to the frame"
Either way I don't have a complete set of brackets.
darktenchi, Make me an offer
I was just letting you know, from what the wiki says people should remove them the frame looks more sleek without them
I plan on cutting them dow and cleaning them up. kinda going for an industrial look.