so after a long, but fun day of riding yesterday I was sore. so I am thinking about putting on some bar riseirs. up 3/4" and back3/4"
I think I am going to make them myself (I am a machinest)
a few qesetions
have you instaled a set and do you like them?
any dimention suggestions for the size of them ? I am thinking about just making a simple bracket out of stainless steel
thanks alot
hi. machinists, we are everywhere ;)
haven;t tried them myself yet.
:)
There are 2 kinds of GS risers on the market I'm aware of, the GenMars:
(http://www.zianet.com/GenMar/images/X102_GS500.JPG)
and the SW-Motech:
(http://www.twistedthrottle.com/ezimagecatalogue/catalogue/variations/6662-350x350.jpg)
The GenMars are up 1" and back 1 3/8" and the SW-Motech are up 1" and back 1". I've been using the GenMars for over 100k miles now and wouldn't leave home without them.
If you just want to go up about 3/4" you can put an extra set of bar caps under the bars. See the Wiki.
Edit to add Pit-Posse risers mentioned below for 1 1/8" up for only $20:
(http://us.st11.yimg.com/us.st.yimg.com/I/pitposse_2000_71154119)
risers!!! do some exercising and get that back into shape lol...i have clip ons and woodcraft rears sets, at 45 i am no spring chicken but i have always had sport bikes. so my back, wrists, pancreas and ovaries are used to it.
frankie
Quote from: thejollyroger on May 25, 2008, 01:48:37 PM
so after a long, but fun day of riding yesterday I was sore. so I am thinking about putting on some bar riseirs. up 3/4" and back3/4"
I think I am going to make them myself (I am a machinest)
a few qesetions
have you instaled a set and do you like them?
any dimention suggestions for the size of them ? I am thinking about just making a simple bracket out of stainless steel
thanks alot
Seeing that risers retail for over $100 (:o), I'm sure you'd be very popular if you made a comparable product available to forum members for a lower price. :icon_rolleyes:
just get another set of top clamps turn them over and get longer bolts thast what im going to do.
Hi there,
I have a set of the SW Motec risers that I'd like to sell.
They're not my cup of tea.
They are perfect and in original box, with proper bolts.
I paid $100 and will sell them for $80 plus shipping.
They are the 1-inch back, one-inch up model.
Let me know.
Yours,
Todd
search bar risers on yahoo shopping and youll find a set from pitposse.com they are 20 bucks they are what I used for my clubmans they are actually for dirtbikes I think but they work just fine. they are an inch raise
Quote from: frankieG on May 25, 2008, 06:42:58 PM
risers!!! do some exercising and get that back into shape lol...i have clip ons and woodcraft rears sets, at 45 i am no spring chicken but i have always had sport bikes. so my back, wrists, pancreas and ovaries are used to it.
frankie
Exercise instead of risers!!!!!!!!!! Tell me that with a smile on your face when your 75, almost 76 years old. :laugh: Just renewed my driver/mc license last saturday so my GS will remain a threat to all on the road till I'm at least 80. :thumb:
Quote from: gsJack on May 26, 2008, 07:49:54 AM
Just renewed my driver/mc license last saturday so my GS will remain a threat to all on the road till I'm at least 80. :thumb:
That's awesome!
Hello again,
Despite what guitarking wrote above, the SW Motech risers are really nice, though they cost more.,
Here's the place where I bought them:
http://www.twistedthrottle.com/trade/productview/2016/101/
As you can see, they sell them for $104.99 plus about $10 shipping.
Read all about them there.
If you are interested in buying them from me, let me know. :)
Best wishes,
Todd
thanks for all the responce I think I might try adding a nouther set of claps upside down.
as for working out I am 6'2" and 230 pounds. I wear a size 38 because I like my pants a little baggy :icon_lol: I got some pretty big shoulders and of cours my :2guns: for arms
lol
I will post a pick when done
Quote from: thejollyroger on May 26, 2008, 10:24:51 PM
I will post a pick when done
Of the bike, or your guns?! :laugh: