Does anyone know if the stock GS front wheel will work with a 99' Kat FE? From what I've gathered the 99' Kat uses a 3.5" wide rim, GS is 3.0".
Appreciate any feedback.
Its a different front axle , why not just run the 98+ katana front wheel?
Quote from: Jay_wolf on June 28, 2008, 01:38:39 PM
Its a different front axle , why not just run the 98+ katana front wheel?
Was thinking I could just get new rotors and reuse the wheel. I'll go with the 98+ wheel if it fits.
Thanks.
Actually the 98-02 Kat uses the same axle as the 88-97 Kat. The axle changed in 03 but is still the same diameter.
Quote from: dgyver on June 28, 2008, 05:17:28 PM
Actually the 98-02 Kat uses the same axle as the 88-97 Kat. The axle changed in 03 but is still the same diameter.
So the 98' wheel will work with the 99' FE?
Do I need to be concerned with 99' rotors bolting onto a 98' wheel?
Appreciate your help getting things sorted. :thumb:
By saying 98, you mean what... Kat or GS?
I do not know if 98+ Kat rotors will bolt to GS wheels.
ben2go has posted a link to the German GS forum about fitting the 98+ Kat 3.5" wheel in the GS forks.
The 98+ Katana wheel is a direct swap into the GS front end,so a GS wheel will swap over to the 98+ Katana front end.It will look very narrow.
Sorry if I wasn't clear and my post is confusing. I was referring to 98+ Kat front wheel. I'm trying to figure out if I can use any Kat wheel (89'+) on a 99' Kat FE and if 99' rotors are interchangeable with earlier years. :dunno_white: I'm in the middle of buying a FE from a fellow member and everything (including rotors) is included except for the front wheel.
Thanks.
Yes, rotors should be interchangeable too.
Quote from: ben2go on June 28, 2008, 08:45:33 PM
Yes, rotors should be interchangeable too.
Cool :thumb: Just need to source a 3.5" Kat front wheel. :)
THanks for the feedback.
You're welcome.
Mhmm i feel stupid . Im not going to diagree with The D or Ben . i swear it was a different axle . but im wrong . i stand corrected :thumb:
Jay,
No sweat. Appreciate you trying to help. :)
Quote from: Jay_wolf on June 29, 2008, 01:58:41 AM
Mhmm i feel stupid . Im not going to diagree with The D or Ben . i swear it was a different axle . but im wrong . i stand corrected :thumb:
The axle is different length just same size diameter.